Doornkaat wrote on 2023-06-22, 02:31: Looks a bit like a passively cooled 3Dlabs Oxygen GMX 2000 to me. Yea, that looks to be correct! Thanks!

https://i.imgur.com/keoRSDK.jpg All I can identify is that the very right chip has a texas instrument logo Any help is much appreciated!

Not sure if this is necroposting but The card posts with the IGPU now! Atiflash isn't detecting it though. Bios seems to be detecting SOMETHING since its able to run AGP bus at 8x (while igpu only runs at 4x) Should I mess with AGP control driver?

If you have any other boards, might give those a try as well, as I said...a very picky gpu. Yea, no dice so far with any of my boards. Might end up keeping it as a decor piece : ) I think that it is well known that the pci bridge on these cards fails easilly. So if you are going to use the …

sirotkaslo wrote on 2023-01-27, 07:44: I also had issues with NF2 socket a board, but have no via to test. They are picky GPUs. You can try letting it run for a few minutes in the dark then reset the pc, that might wake it up. Unfortunately, no dice. I might try to heat it up with a hair dryer or …

I had mixed success with this card. On my Nforce 3 i have lots of cold boots, no image, but they do work (usually) on my 4coredual-sata2. I also had one that died during driver install. Could be related to my chipset? Ive been testing on 865chipset boards & a S462 Via board The card was sold to me …

Hi, I recently picked up a Radeon 3850 AGP, but it isnt posting. The card is warming up when touched, but no display at all. I've tried 3 different systems + monitors, tried to use Igpu (nothing at all). All power plugs are installed tightly too. If the card is dead, any hope of getting it working? …