VOGONS

Search

Common searches

Search results

Display options

Display options

Re: Ti4200 4x not working on most motherboards

Posted on Today, 05:02

I'm starting to wonder about the caps that I replaced on the board. That's why I always say - dudes, don't waste your time, just replace the capacitors to polymer ones right away. https://forum.overclockers.ua/download/file.php?id=363911&mode=view Unfortunately, the FX5700 came to me with a cracked …

Re: Ti4200 4x not working on most motherboards

Posted on Yesterday, 12:54

I had an X800 PCI-e, which was detected only on one motherboard when cold. After heating - nowhere. I replaced all 1117 and TL431 on this card, and all discrete logic. The card worked fine only after replacing the regulator for PCI-e terminator. But only for a couple of months, then even replacing …

Re: Ti4200 4x not working on most motherboards

Posted on 2025-03-20, 06:31

Looks like it's fluctuating between 3 and 3.4 volts. Seems okay? It depends. If the manufacturer saved money and ran 3.3V directly from the connector, then it's so-so. If there is a 1117 regulator with 5V to 3.3, then it's a lot. It should be somewhere around 25mV peak-to-peak. When you turn on the …

Re: EAX appreciation thread

Posted on 2025-03-18, 09:32

On headphones I have never understood and heard what it is doing exactly and why on stereo sources. CMSS on acoustics is a slightly complicated upmix (with channel delays and cutting out some frequencies). This was done on tubes schematic when quadraphonic systems started to appear. Wave …

Re: EAX appreciation thread

Posted on 2025-03-18, 08:20

I can only select between CMSS, CMSS2 and Off. There aren't any other options . MacroFX is probably a different (more accurate) 3D head model, reflections from which are taken into account differently. Elevation filter - theoretically it is... the same 3D head model, which has ???? I have no idea, …

Re: EAX appreciation thread

Posted on 2025-03-18, 06:34

You can actually hear them flying above your head when everything is configured properly. 5.1 audio stream contains enough spatial information for the CMSS3 to work properly. In games that give coordinates of sound sources via DirectSound or OpenAL - everything is generally fine with this. But …

Re: Ti4200 4x not working on most motherboards

Posted on 2025-03-15, 05:02

Carefully remove the heatsink from the video card and inspect the condition of the parts and tracks in the specified area on both sides. The last two contacts (one on each side) are responsible for selecting the AGP voltage. Is there any way to test this to see if it's correct? e.g. is it just a …

Re: EAX appreciation thread

Posted on 2025-03-14, 11:42

Here's some more info about CMSS-3D from the X-Fi Demo Disc: The bit about 128 virtual positions (including above and below) is interesting. This is a marketing ploy. X-fi supports 128 audio streams (Audigy - 64, SoundBlaster - 32) https://www.vogons.org/download/file.php?id=213731&mode=view They …

Re: NVIDIA's 32-Bit PhysX Waves Goodbye with GeForce RTX 50 Series Ending 32-Bit CUDA Software Support

Posted on 2025-03-14, 11:13

The topic of "hardware Physx" is already exactly 15 years old, and it managed to die before it even began. https://list.fandom.com/wiki/List_of_games_with_hardware-accelerated_PhysX_support Given your genre preferences, you will play about 5 games from the list and only once. It's easier to get a …

Re: NVIDIA's 32-Bit PhysX Waves Goodbye with GeForce RTX 50 Series Ending 32-Bit CUDA Software Support

Posted on 2025-03-14, 04:31

The GT 710 that I sold probably has a purpose now The point is that different driver versions have the same file names. Windows will not be able to install two drivers of different versions, they will conflict. Therefore, for owners of 5xxx series video cards, only the 572 driver is suitable. Its …

Re: EAX appreciation thread

Posted on 2025-03-13, 14:49

You can actually hear them flying above your head when everything is configured properly. This effect is present in movies and games where the sound director was not deaf. 5.1 audio stream contains enough spatial information for the CMSS3 to work properly. In games that give coordinates of sound …

Re: EAX appreciation thread

Posted on 2025-03-13, 10:46

I haven't tested this extensively as I prefer to use my 5.1 speakers Lucky. A separate room is needed for such a setup. For multichannel acoustics, there is no point in activating the CMSS3D at all. Only to make a multichannel from stereo, but this is pointless. Games/movies already produce a …

Page 1 of 27

Go to top of page Go to top of page
Close window
Close window