Thank you very much for this information! I'm still trying to make the previous solution work because I'm afraid to modify the BIOS, to be honest. It's not due to lack of experience, but I recently bricked an RX5600xt and I still haven't found the "time" to find how to unbrick it, lol. Yup, mine is …

Double check the IRQ settings... https://www.vogons.org/viewtopic.php?p=1146677#p1146677 Yup, you were right from the start. It was an IRQ problem. I hadn't tried IRQ 5 because my sound card is there (shows up on that IRQ in POST, so I have zero idea how to change it). The diagnostic tool simply …

"NE2000 compatible" definitely should work, but... - first, you need to configure the card using the chip-specific utility, hopefully the attached stuff will work - second, make sure the "NE2000 compatible" driver provided with Windows is configured with the same settings, again - https://www. …

Will do, but before: This card has a UM9008F chip. Does anyone have the correct drivers for this card? Or should the "NE2000 compatible" one work?

It's entirely possible that I used a wrong driver, I'm going to check out what chip the card actually has, and send pictures of both card and chip. It's Win98 SE I'm confident that I know how to setup a LAN, but, just in case, this is what I did: - ipconfig /all, got the mac address of my adapter. - …

It seems I'm stuck for now. I don't have a floppy drive and my attempt to make a SD-to-FDD converter (using FDDemu on Arduino) failed, and I don't have an older router to test. I tried with a 12 year old router directly to the NIC and I get no ip. I also tried another driver that seems to be …

See this thread, a very efficient method using the debug command: https://www.vogons.org/viewtopic.php?p=999782 Thank you so much for pointing this out! I apologize, I didn't search the forum hard enough before asking. The solution didn't quite work for me yet, apparently when I set the flag? for …

DundyTheCroc wrote on 2023-06-14, 08:18: Do you have video settings in BIOS? Not really, nothing that could disable one or the other, unless I'm mistaken. Is there a specific option I should look for? Thanks!

Thanks everyone for your replies IRQ: Tried IRQ, no luck. Could try disabling LPT, COM and removing the sound card to try on IRQ5... Card ID: I can't find anything that ID's this card beyond the "NE2000" compatible sticker. Under that sticker I should be able to read the IC number, but I don't know …

Hello there, I have a Pentium 233 MMX in the shape of an industrial SBC. This computer has a CHIPS 65550 video "card" and includes a LVDS LCD connector for a flat panel as well as a VGA connector for a CRT monitor. Managed to download and install the driver correctly, but, if I want to use 1024x768@ …

Hello there, I'm building a Pentium 233 MMX using an SBC and a beautiful orange aluminum case for an old telephone equipment I found on the street (will showcase as soon as it's finished!). I got an "NE2000 compatible" ethernet card (ISA, my SBC doesn't have PCI slots), managed to install drivers …