JST rings a bell actually. I think I've looked these up before for something else now that I think of it. That gets me on a path at least. Just need to identify the different sizing now to get the right pins and connector housings

Does anyone know what these fan connectors are so I can order some from digikey, mouser, or elsewhere, along with pins to crimp on? I have a few older AGP cards here I'm replacing heatsinks and fans on because the old fans are dead or have bad bearings. I've found some HSF's that fit but the fan …

There is this little mom and pop type computer shop near me. I generally have avoided them over the years because they're new inventory is generally overpriced and a lot of what they have on the shelves is 20 year old stock that they never bothered to mark down sticker prices on to clear out. The …

It's all in Windows. Haven't really used native DOS much for anything more than updating the BIOS. I do have another CD Rom drive actually. The one in the machine is an old Creative 52x. I've got an unknown 24-32x drive I could try, as well as some other more modern CD/DVD combo drives. I'm pretty …

For that CPU, I'd either be going with an Abit NF7-S or an Asus A7N8X Deluxe. I had both back in the day when they were new and they were both great boards. I think they were also the top overclocking boards for that platform as well with the exception of a DFI board who's model I can't recall …

The drives are on separate channels. the IDE/CF reader is on the primary and CD ROM on the secondary as they should be

I left it running 3dmark 99 all night. Just came back this morning and it was still running. The FETs next to the CPU are pretty cool to the touch, at least the heatsinks are so I don't get the sense I'm straining anything there. Right now it's at 333mhz still with external cache disabled. I'd need …

okay, i don't think it's power supply. I wasn't metering it under load. the 12v holds steady at 12.3~v. I've got the new k6 clocked at 333mhz right now and it's stable if I disable the external cache. I thought maybe it was the cache that couldn't handle the speeds but 333mhz became my new stable …

For reference, this is the Enermax AT PSU I have right now. Maybe someone see's something

I do have the latest BIOS already so no issue there. I do have stuff here to make an ATX PSU adapter and I can do that to test but I have a limited number of ATX PSU's that put out enough amps on the 5v and 3.3v rails and need the ones I have for other builds ultimately but I was thinking after I …

I've been working on a socket 7 build for a few weeks now since I managed to acquire a board, case and power supply to house some parts I've had around for years. Specs below Aopen AP5T AMD K6-2 400mhz 128MB SDRAM ATI Rage something PCI Voodoo 2 12mb SLI Win98se installed on CF card via IDE adapter …

oh, I think I figured out what I need. I was following wrong earlier, but I found this one, seems to be the same 3904 with k1n marking as what quicknick said was on their card. I guess the same component is still available new https://www.digikey.ca/en/products/detail/diodes-incorporated/MMBT3904 …

I have an Asus V8420/128M and an MSI G4Ti4200-TD64. I'll need a copy of nvflash but I can dump the roms from them if they'll help

okay, so on the premise that I still want to repair this circuit. some of this is over my head, but if I understand correctly, does this look like the correct part? Like I said, this is not quite my jam https://www.digikey.ca/en/products/detail/onsemi/2N7002/244345 I have another HSF with a plug on …

I can make out HR on the transistor that's still intact but that's the one at Q804 per the silk screening. I have the broken one stuck to a piece of tape. My eye sight is being nicer to me today apparently but I can't make out HR on it. the right edge is broken off, but what I can make out at the …

Hey Everyone, new member here, although I suspect I'll be around a while. I'm looking for some assistance at the moment in identifying this transistor on an Asus V7700 GeForce 2 GTS. I've attached a stock photo with the one I need to identify circle The one on the card I have here is broken and I …