You might want to try a different output. I had to use /o1 on mine, as the primary output was mapped there, for some reason, on my Dell Latitude X300. Thanks for the suggestion @ajacocks. No luck with /o1 though. @digger - Using the Jemm v5.84pre2, now not even VSBHDA works as shown below. jemx584. …

Good luck! And again, don't forget to run DLOAD QPIEMU.DLL too, as well as the correct version of HDPMI, depending on whether you are using SBEMU or VSBHDA. 👍🏽 I tried the Jemm v5.84pre2 with dload and everything. However SBEMU still does not work. Through the headphones I hear a sort of …

@bert003 VSB, a much older piece of software, can work in two modes: in QEMM mode when QEMM is loaded, or in an alternative mode that works only when no EMM manager is loaded at all, since it will then switch the CPU into V8086 mode itself. But regardless of which mode it's used in, it does not …

Yep I am loading the correct JEMMEX.EXE file. Since I wrote the post I found this: https://github.com/volkertb/temu-vsb/releases/tag/temu-3.03-vsb-2.02a It requires QEMM though to run: REMOVED I installed QEMM but I am getting an error that QEMM386 is not loaded on the line: DEVICE=C:\QEMM\QDPMI.SYS …

Hi guys, I am new to this forum. Got to know about SBEMU and decided to experiment with it on my Dell Latitude D530 using FreeDOS. Unfortunately I got no luck since the system hangs when invoking SBEMU from the autoexec.bat as follows: C:\SBEMU\JLOAD.EXE C:\SBEMU\QPIEMU.DLL C:\SBEMU\HDPMI32I.EXE -r …