Re: RG100 Does Socket 7?
Posted on 2010-04-14, 10:09
Coolermaster heatsink? I like the heatpipes 😁 I have the same motherboard but unfortunately it won't post. btw, just noticed your Tiger Eye motherboard has onboard SCSI? Nice!
Re: RG100 Does Socket 7?
Posted on 2010-04-14, 08:33
Thanks a lot for everyone's valuable comments. My shuttle has just arrived! Not that nifty spaceship the Emperor uses, but a piece of junk from VIA. Hehe! Only joking. I didn't realise it was NOS. (New Old Stock.) There's even a little bag of extra fresh unopened jumpers. I wonder which AGP …
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 16:20
I've come across one or two mainboards that insisted in a battery. Might have been VIA crap though. Yes, whenever I find a new mainboard I'll usually pull the main battery to let it drain (without removing any jumpers) and after a couple days or so I'll boot the motherboard without a battery. So …
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 15:58
I've come across one or two mainboards that insisted in a battery. Might have been VIA crap though. Yes, whenever I find a new mainboard I'll usually pull the main battery to let it drain (without removing any jumpers) and after a couple days or so I'll boot the motherboard without a battery. So …
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 14:39
> the BIOS could potentially become a bit "confused" and then put itself in to a > kind of non operational state? Yes, that's possible. Oi, I've tested countless motherboards without the battery installed. Important is that you do not ever power on a motherboard with it's jumpers set to clear CMOS! …
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 13:36
Woops, you posted as I was editing my post above yours! It should be all you'll need to know 😉
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 13:19
In that video, you're using a type of graphics card I haven't seen before. I'm guessing it's an ISA card. Unfortunately I don't have any ISA graphics cards. However, I might be able to test this mobo with a VLB graphics card in the next couple of days. I'm almost positive the jumpers are correct, …
Re: RG100 Does Socket 7?
Posted on 2010-04-13, 10:40
It looks like a 430VX mobo, one of -the- oldest ATX mobo's around. The VX chipset can only cope with the lowest density SDRAM, hence why a single sided 64MB stick won't work properly. The mobo looks like it's made by Intel. Interesting that it has no SIMM slots whatsoever
Re: RG100 Does Socket 7?
Posted on 2010-04-13, 09:36
swaaye wrote: ..... Super Trivia Challenge: Which CPU doesn't fit in this photo!?!?!??!? The gold cap Pentium, but theres always the friendly hammer, it makes everything fit 😁
Re: Asus 486 mobo PVI-486SP3 won't POST.
Posted on 2010-04-13, 09:29
Proof it works http://cid-1fa95f4397ce8214.skydrive.live.com/self.aspx/Ebay/486sp3%5E_2.m4v Either jumpers are set wrong, wrong type of RAM In that video, you're using a type of graphics card I haven't seen before. I'm guessing it's an ISA card. Unfortunately I don't have any ISA graphics cards. …
Re: Trying to get silver to run / voodoo2 questions
Posted on 2010-04-13, 09:22
Is it just your standard female to male vga cable? It's a standard VGA cable, though I can't remember from the top of my head wether you need male-male, female-female or female-male. You'll need to check your Voodoo and 2D card's connectors. I tried with a cable that was about a meter long and it …
Re: 486 PC prices...
Posted on 2010-04-13, 09:18
What surprises me more is not that people are asking $200 for a 486, but that theres actually a few people who are, in multiple occasions, paying that for a 486. Lol, if this continues, in a couple years I'd better get my attic insured!
Re: Bootable floppy disk:Test the size of the cacheable area
Posted on 2010-04-05, 13:14
Wow, I never noticed that. Thanks! 😀
Bootable floppy disk:Test the size of the cacheable area
Posted on 2010-04-05, 11:19
When building computers (especially older ones) I like to piece hardware together that have good synergy. However, all the time I'm having trouble at how much memory any particular mainboard can cache. I'd like a tool that can test exactly how much memory is cached before I install an operating …
Re: P200mmx DOS machine
Posted on 2010-04-04, 22:58
EOD or not, they are SDRAM... where did you get confused ? EDO is not SDRAM actually, it's a different type of memory. (EDO is asynchronous memory as opposed to SDRAM, which is synchronous) Perhaps instead of SDRAM you ment DIMM, as opposed to SIMM? If you try to boot with 1 EDO DIMM and 1 SDRAM …
Re: P200mmx DOS machine
Posted on 2010-04-04, 19:52
keropi wrote: @Tetrium: both dimms are 168pin EDO ones, which is fine for a pentium1 system. Also the MVP3 chipset is OK , just a cheap working solution... It's no speed rocket but it get's the job done AFAIK Ah ok 😀 I was just wondering since in your OP you said there was SDRAM in it
Re: P200mmx DOS machine
Posted on 2010-04-04, 14:06
Are you sure the memory modules aren't EDO DIMM's? The memory chips look kinda 'fat' compared to the old fashioned 32meg SDRAM DIMM's I'm used to seeing. Btw, were those VIA MVP3 chipsets realy that bad? I don't have a (working) board with that chipset so can't tell from my own experience. Edit:I …
Re: kernelex any good?
Posted on 2010-04-02, 16:05
KernelEX works great, just read the thread @ MSFN for it..... I was going to mention MSFN but you beat me to it ;) MSFN.org is one of the best sites for finding in-debt information and downloads for any kind of windows. Afaik KernelEX has been -extensively- tested with all kinds of software, there …
Re: FREE* Intel VS440FX mobo + CPU + RAM
Posted on 2010-04-02, 16:01
The mobo haz arriventh!! It arrived a couple days ago and is in perfect condition. I only haven't had time to test it yet, I want to take a good look at the manual beforehand. Thank you so much Swaaye! 😀 And my complement for the superb packaging 😉
Re: Anyone can post pictures showing heatsink removal?
Posted on 2010-03-22, 21:19
So'd you put a wide blade putty knife between the CPU and HS and twist yet? Whenever I (try to) remove a heatsink from a PCB using something to use as a lever, I'll put a small plastic card (like an old telephone card or old credit card or so) and hold it on the PCB to prevent damage to the PCB. …
Page 475 of 476