VOGONS

Search

Common searches

Search results

Display options

Display options

Re: Updating firmware on an Extron RGB-HDMI 300 A

Posted on 2021-12-26, 18:42

There could be, depending on how old the current firmware is. Do have a play with the settings, even after doing the auto setup on the image - doing some improved the image quality for me when capturing from a 3DFX card. Yeah. I've been fiddling with It for the last couple of days and improved …

Re: Updating firmware on an Extron RGB-HDMI 300 A

Posted on 2021-12-26, 17:05

Serial is the way to do it, either via the TRS cable above, or via the other serial connection on the back of the device; the manual contains pinouts. I made my own cable. You don't need an old computer; a USB to serial adapter works wonders, so it's just a matter of sourcing the software (which …

Updating firmware on an Extron RGB-HDMI 300 A

Posted on 2021-12-24, 13:14

Hi people! I've checked the manual for updating the firmware on an Extron RGB-HDMI 300A, from what I can see there are only 2 possibilities: https://sergiodaza.com/ebay-store/images/cable1.jpg https://sergiodaza.com/ebay-store/images/cable2.jpg These are the 2 cables de Extron RGB-HDMI 300 A admits …

Re: Retro Rig Photo Thread

Posted on 2021-11-24, 20:04

"Mitsumi" Anybody knows this brand???? 🤷‍♂️ Yeah, pretty common manufacturer of computer parts in the 90's. Thanks for the info Devius. Wow! Searching a little more I just found out the following info about this Japanese brand. This is not just "any brand" Check it out! One of the company's most …

Re: Retro Rig Photo Thread

Posted on 2021-11-24, 20:04

"Mitsumi" Anybody knows this brand???? 🤷‍♂️ Yeah, pretty common manufacturer of computer parts in the 90's. Thanks for the info Wow, searching a little more I just found out the following info about this Japanese brand. Check it out!: One of the company's most noticeable product lines are video …

Re: Retro Rig Photo Thread

Posted on 2021-11-24, 19:14

Back when I was younger, a 486 Packard Bell was my first computer. My parents bought it because our bank offered it with a discount here in Spain. Hence the reason why I own one and why I just love old Packard Bells!!! So, this is my beauty! Love PB!!!!!!!!!!!!!! A Packard Bell Pulsar 16. Here are …

MBF Doom on Pentium MMX Problems

Posted on 2021-11-20, 12:47

Hi people. I'm trying to run MBF Doom 2.03 with Ultimate Doom WAD file. The game boots up and works but when I try to set it to "High resolution" in the Setup Menu my computer reboots. I also tried Sigil WAD and when I try to save the game it also reboots. Any ideas??? I'm using Ms-DOS 6.22 on a …

Schneider Euro SX 80386 BIOS config Help Needed

Posted on 2019-10-23, 12:55

in Milliways
Hi guys! I just put my hands into this German-manufactured-beauty!! The 26Pin floppy disk doesn't seem to be working so I connected a Floppy emulator, formated the HDD and installed Ms-DOS 6.22 fresh. Now, the trouble seems to be that the PC doesn't recognise XMS Memory. In fact, there is a section …

Re: VGA Capture Thread

Posted on 2018-02-28, 20:56

Nope. What you need for VGA2HDMIPro is a HDMI capture card since the scaler unit outputs digital signal via HDMI. The good news most modern consumer capture cards do have HDMI input. Avermedia, Startech and Elgato (something like used elgato game capture hd) would do. I think I've seen some …

Page 2 of 23

Go to top of page Go to top of page
Close window
Close window