Re: [Help] Screamer - LAN Play
Posted on 2017-05-13, 11:51
BTW: My Screamer version is from Gold Games 2 Collection, maybe this is a newer version than the retail version.
Re: Tilt! (Pinball Game by Virgin Interactive)
Posted on 2017-05-13, 10:41
I tried with cycles 10000 today.. and the flickering and automatic click was much slower. But then i set machine to vesa_oldvbe, set cycles to max 95% again and did a new install off the game, run uvconfig, and then the Game runs normal. There is no flickering and the intro video of the table are …
Tilt! (Pinball Game by Virgin Interactive)
Posted on 2017-05-13, 00:23
I found my Gold Games 2 Collection, and it includes Tilt! A Pinball Game by Virgin Interactice. I manage to install the game with the Installer on the CD. But after installation, when i enter TILT to start the Game an Error is shown, screen cleaned and Game says : to play again enter TILT. Error …
Re: Screamer (Bleifuss) keeps crashing on 0.74
Posted on 2017-05-12, 23:06
I had the same Problem today, i set Details to low and Track can be played. Problem is on 5th Track of Championship, when you see a crane with a container on the left side. But i do not find the soulution on Dosbox page... Maybe it is to delete map5h.dat an copy map5l.dat as map5h.dat, so that both …
Re: [Help] Screamer - LAN Play
Posted on 2017-05-11, 20:39
Do you use Win95 on both PCs? I remember i have Problems running a Game in Dos and the other in Win98. (Not Screamer, maybe Carmageddon) I don't know if it did not find the other PC or if it crashes during network play. Problem was the frame type and other network settings in Win98... (Frame …
Re: [Help] Screamer - LAN Play
Posted on 2017-05-10, 22:17
I have the German Version of Scream: Bleifuss I installed it on Dosbox and on a real Machine, a Pentium 100 with Soundblaster 2.0. Loaded the LSL, Networkdriver and IPXODI on Dosbox and Pentium. Start the Game on Dosbox in SVGA and on the Pentium in VGA (because its to slow for SVGA) Start a Network …
Re: Networking doesn't work in 86Box
Posted on 2017-05-10, 12:05
I did a manual cleanup of 86box.cfg (removed the ne2000 section, was inserted when i try the ne2000 ISA card) an removed everything from ne2000 in win95. Now i get a IP Adress from my Router and i can play Screamer Rally with other PCs over LAN. Thank you everyone fpr helping, and thank you battler …
Re: Networking doesn't work in 86Box
Posted on 2017-05-10, 11:38
I now tryed the latest build feb2846 an Internet works.. But i get a IP adress of 10.0.2.15 and a Gateway from 10.0.2.22 ? But in 86box config i set to PCap , but it look like i using slirp ?
Re: Networking doesn't work in 86Box
Posted on 2017-05-09, 23:56
can i start 86box with a parameter to create a log file? btw: i don't have ethlist or niclist i do copy and paste the network guid from dosbox status window.
Re: Networking doesn't work in 86Box
Posted on 2017-05-09, 23:20
Here is my 86box.cfg gameblaster = 0 gus = 0 ssi2001 = 0 voodoo = 1 buslogic = 0 netinterface = 1 netcard = ne2kpci pcap_device = \Device\NPF_{444C8E2B-183F-4322-8F14-AE71EFF2B2E7} model = 430vx cpu_manufacturer = 0 cpu = 3 cpu_use_dynarec = 1 cpu_waitstates = 0 gfxcard = mach64x video_speed = 5 …
Re: Networking doesn't work in 86Box
Posted on 2017-05-09, 16:26
yes, i use the latest build. (optimized for core2) i try with DHCP and with 192.168.178.19. 255.255.255.0 (86box) Host has 192.168.178.4 Ping the Router with ping 192.168.178.1 no response when pinging from 86box, from Host it works. In 86box.cfg i set: networkinterface=1 I am searching for …
Re: Networking doesn't work in 86Box
Posted on 2017-05-09, 11:13
I installed Win95 in 86box 1.20. Network Card ist RTL8029 and Drivers are installed. WinPCap is installed (Host system is Win7 64bit) But win95 says it cant get a IP from DHCP so i think network is not working. Also the Homepage of 86box say: PCap needs manual configuration... What manual …
Re: Recommended Need For Speed game for XP???
Posted on 2017-05-08, 21:44
I loved NFS Most Wanted, Maybe there is a Savegame with all Cars ? I am sure there are Unlockers to give you access to all cars. I also had a Trainer for endless slow motion time... so you can win every Race. Underground und Underground 2 are also very great Games
Re: I can't find any old software to monitor CPU & GPU temperature on Windows 9x
Posted on 2017-05-07, 12:08
I think old Motherboards/CPU/GPU did not have a Sensor for read Temperature. On my Athlon Systems there was PC Probe on the Driver CD. But on my older Systems Pentium 1 / Pentium 3 there is no Way to check Temperatures. The first Motherboard i have that was able to read Temperature was Abit KT7 The …
Re: Screamer Rally w/ glide Help!
Posted on 2017-05-07, 09:19
It is one of the best Versions Daum did. I use the Versions of 6thMay2013, 27Jan2014, and 25Jan2015. 2014, 2015 Versions are more stable when running Windows95 inside. 2013 i used for nglide and Dosgames. But yesterday i learned that the 2015 Version works with nglide too (for dos games) So you have …
Re: Screamer Rally w/ glide Help!
Posted on 2017-05-06, 22:29
Sorry i was wrong, i tested it with latest Daum Build and it works with nglide too. Do you see the green-on-white or silver-on-black 3dfx Logo ?
Re: Screamer Rally w/ glide Help!
Posted on 2017-05-06, 21:59
But then you do not use Nglide. What Resolution are you playing ? 640x480 ? Daum latest Daum Versions ingnoring the GLIDE= setting in Dosbox.conf .. There is always GLIDE=TRUE Then DOSBOX emulates the 3DFX card and you have to copy glide2x_emu.ovl to Game Directory and rename it to glide2x.ovl To …
Re: Screamer Rally w/ glide Help!
Posted on 2017-05-06, 20:08
I don't know if setup detects a 3dfx card... Just use setup to configure your soundcard. Start the game with strt3fx.exe manually or edit the .bat file to call strt3fx.exe. ah, and you have to copy the right glide2x.ovl to your game folder. There 2 glide2x.ovl in the dosbox directory. One is for …
Re: Screamer Rally w/ glide Help!
Posted on 2017-05-06, 16:54
Use Daum Build 6th May 2013 and set glide=true in Dosbox.conf to use nglide. Start the game with strt3fx.exe
Re: Turbo LED but no switch?
Posted on 2017-05-04, 09:31
some Boards can be switched to de-turbo mode via BIOS or hotkey.
Page 4 of 26