Re: iMuse driver for Tandy sound?
Posted on 2018-10-10, 15:04
and there is already a tandy driver for miles, but i didnt try it yet. maybe if there is one, the detection needs to be removed.
Searching BIOS for Proton Single CHIP XT
Posted on 2018-10-09, 12:20
I'm searching for BIOS Variants for the Proton Single Chip XT, unfortunaly my bios chip died and i have only turbo XT BIOS which works. But it does not activate the 128kb memory bank to get 640kbytes of RAM. This only works with Original BIOS. Anyone owns a Micro XT Board with the Proton Chipset and …
Re: iMuse driver for Tandy sound?
Posted on 2018-10-09, 09:27
Innovation SSI-2001 MIDI driver don't know about imuse 😳
Re: FMonster, the monster of sound synth
Posted on 2018-10-09, 09:00
Tandy DAC would require IRQ 7 and 240h right, hmm it would be pointless if you can't configure each function to be present at same time. I'm very intressed how detection routines deal with the final card 😁
Re: Tandy 3 Voice Sound - SN76489 ISA Soundcard Project
Posted on 2018-10-07, 11:26
Wow there is software for pcm playback on sn76489 😀 ftp://ftp.oldskool.org/pub/tvdog/tandy1000/so … nd/digimidi.zip
Re: Phenom II X6 for modern pc?
Posted on 2018-10-07, 10:37
i still use a A10-5800k and it does well in daily usage. Even a C2Q is still sufficient for this. Except for some stupid javascript loads..
Re: ECS Elite UM8810PAIO REV:2.1
Posted on 2018-10-07, 10:07
Hi, i had a BIOS Collection from some one here with all BIOS Files for all Revisions of UM8810 PAIO. maybe some one has this zip file too ? unfortunaly i cant find it.. Thanks Matthias
Re: GF 6600 LE perfomance on win xp
Posted on 2018-10-06, 15:54
Only 64bit MemoryBus and DDR2 holds the 6600 GPU back. i have a 6200 with 128Bit DDR1 and it unlocks to full 8 pipelines and 3 vertex units.Which is faster then the 6600LE.
Re: ALI Chipset vs AGP Card - K6-2 Commate S7AX
Posted on 2018-10-06, 13:05
Got it fixed, the ALI M1542 BGA had broken solder joints.. i used a lot of flux and a heatgun to reconnect it.. hopefully it will work forever ;) And Memory Modules are running now :) All my Capacitors are new already. Yeah the Voltage Regulator is really hot, there is a heatsink on them and Air …
Re: FMonster, the monster of sound synth
Posted on 2018-10-05, 11:20
Is it also possible to get single Blocks ? 😁 i would like to get CMS only 😀 and still the SSI Kits..
Re: Newly made Gravis Ultrasound compatible cards ... what's the degree of interest?
Posted on 2018-10-04, 10:48
Brackets: I'll get back to that ... I already have a printout of a proposed layout contributed by vittek, but that needs some minor adjustments (spacing between DSUB and audio jacks are fine, but the overall bracket is off). About distributing them ... I have to admit I have rather little interest …
Re: ALI Chipset vs AGP Card - K6-2 Commate S7AX
Posted on 2018-10-03, 18:01
Stupid.. weird problems again. Filename photo_2018-10-03_18-57-48.jpg File size 75.78 KiB Views 1065 views L2 Cache disabled, and memtest runs ok.. But is L2 Cache defective or memory controller ? someway to figure this out ?
Re: Innovation SSI 2001 re-engineering and/or conclusions
Posted on 2018-10-03, 13:33
Wow you do a nice job, making a PCB for every block etc. 😀
Re: Reversing the Disney Sound Source
Posted on 2018-10-01, 10:08
What about adding a 7528 instead of a 24 ? allowing for stereo on 1 too 😀
Re: MicroProject - MicroSD to LPT Printer Port
Posted on 2018-09-30, 08:47
Jo22 wrote: Very nice! 😁 say, does it work with normal " full size" SD cards, too ? Yes if you add a normal sized shield, maybe connectors for different SD Shields can be added to the breakout PCB. But not all cards won't work 😀
Re: MicroProject - MicroSD to LPT Printer Port
Posted on 2018-09-30, 08:44
And now ? this driver will not work with this adapter unless its modified and pin's are matched in sourcecode. Also it's a outdated version.
Re: MicroProject - MicroSD to LPT Printer Port
Posted on 2018-09-29, 11:19
its very handy, very small but slow. But its much better to install borland C 3.1 from microsd instead of changing several floppys :D Or if you have a XT Clone with floppy only.. or a XT with 360Kb floppy and you simply want to drop some files easily. The "Nilquader " Driver needs only ~1,5k RAM and …
Re: Reversing the Disney Sound Source
Posted on 2018-09-29, 11:01
looks good, is this already tested ?
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2018-09-28, 15:27
Are there Games supporting AY Music Features ?
Re: Newly made Gravis Ultrasound compatible cards ... what's the degree of interest?
Posted on 2018-09-28, 14:37
SOJ sockets are gone then. I did attempt to fit some twice but actually failed. SOJ footprints will still remain tho. About the amplifier situation - I'll look into that. For the amp, maybe go for op-amp and a pushpull output stage ? it seems many of the analog amps are discontinued now, even some …
Page 91 of 146