I am affraid that you have faulty RAM chips on graphic card. Because you dont know the faulty one, you need to replace them all

hello guys, I have this mobo with amd486 DX4 @ 100 bought for only 3 euros :) I am looking for a suitable BIOS, the CPU gets warm but no output, I cant see any damaged tracks or else, in fact, the Mobo looks brand new. I think that I could give it a try, flashing the bios, don't see what could be …

Can you post a picture of your display control panel, i.e. where you change the resolution? I have formated the PC over 10 times (windows 98 SE) and no good results. Instead of reinstalling over and over again, it might be useful to make an image of the drive after you finish the installation (but …

Can you post a picture of your display control panel, i.e. where you change the resolution? I have formated the PC over 10 times (windows 98 SE) and no good results. Instead of reinstalling over and over again, it might be useful to make an image of the drive after you finish the installation (but …

smeezekitty wrote: What does DXDiag show? What drivers installed and does acceleration work? Yes my friend, all tests good. Only struck on 640

Hi guys, nothing worked :S I have tried all the tips. So I have changed MOBO. A good friend offered me an Jetway v.933AS-L BIOS N11 (chipset VIA) with P3@1Ghz. I have fitted and ID 20GB (Master), 82GB Slave and DVD ROM. Pulled out FX5200 and fitted on this. When I booted, I had all the resolutions ( …

hi! thanks for the tip. I have tried to install the official drivers and DX9 but the problem is the same... stuck on 640*480

Hi guys! I have a tricky challenge for the Retro Gurus here... I have an FIC VB-601 with 256 MB latest BIOS to support big HD's (160GB), a point of view FX5200, unofficial NVIDIA driver 82.xx and a P3@550. The problem is that I cant change the resolution from 640*480. I have installed the Intel …

Hi guys! First of all, I want to thank all the kind and fast info that provided. Dont know why, after turn off and on the computer, the card was recognized. My problem is find a suitable driver for DOS :( I am searching in the link that was kindly posted brostenen, next will try to find a tutorial. …

Hi guys, this is my first post on this forum, but I am following the posts here for some time, always "on the window". I have a CT4520 that I would like to configure on a P2@450Mhz system running Windows 98 SE, but I cant find anywhere the drivers. Can some one point me a good link to download the …