Re: WebOne - proxy for old browsers to make them Web 2.0-capable
Posted on 2022-10-04, 16:39
In the console windows i get this message: "POST /inform (192.168.5.113) " The ip adress is for my Ibiquity switch.
Re: Isa sound card 16 bits in slot 8 bits??
Posted on 2022-09-22, 14:29
I have testet Sound Blaster 16 - CT4170 and CT2260 on 8bit ISA on an Amstrad PPC640 - NEC v30. Works fine. Using UNISOUND to initialize. I have a video on that her: https://youtu.be/1tC3t2kLSpI
Re: USB ISA cards?
Posted on 2022-07-19, 23:02
1. the eBay type, which ships from numerous suppliers and has socket for an option ROM. The option ROM is however not usable as some of the required address lines are not presented to the chip. Therefore this can be used with a driver or the option ROM stored elsewhere. Is there a ROM for the eBay …
Re: USB ISA cards?
Posted on 2022-07-14, 18:33
8bitbubsy wrote on 2022-07-14, 11:26: So, does it make sense to use the new 286 driver on a 486DX4-100? Will it work and give faster speeds? YES !
Re: USB ISA cards?
Posted on 2022-07-13, 20:42
What is your 286 machine ? On my 286 8MHz, SpeedTest is at 400Kb/s for Write. (Tandy 1000 TL/2) Also, How is configured your XTIDE ? Is it a V2, with the optimized driver ? (286, 16Bit) It will be at least when a BIOS Will be ready. My 286 is running at 10Mhz. I beleive that my ISB thumbdrive is …
Re: USB ISA cards?
Posted on 2022-07-13, 19:26
I just tested the CH375286.SYS. v0.22 It works on my 286 10 Mhz machine. I copied PlanetX3 from USB to CF. 566KB tok 36Sec. Speed = 15,7KB/Sec. The original driver (V2.0A) was 9,25KB/Sec. And original V1.9 (no A) was also 15,7KB/Sec. Can you test with disktest ? With the new disktest i got very …
Re: USB ISA cards?
Posted on 2022-07-13, 19:12
FreddyV wrote on 2022-07-13, 09:56: The CH375216.SYS I shared was buggy, I published the correct version on the Vintage Computer Forum thread. But you need the LoTech for this. I downloaded a newers version of the CH375216.SYS from Vintage Computer Forum. Now the driver wont work on my Aliexopress …
Re: USB ISA cards?
Posted on 2022-07-12, 16:35
Here is the V0.22 Driver version, with 286 supported and some small changes. I just tested the CH375286.SYS. v0.22 It works on my 286 10 Mhz machine. I copied PlanetX3 from USB to CF. 566KB tok 36Sec. Speed = 15,7KB/Sec. The original driver (V2.0A) was 9,25KB/Sec. And original V1.9 (no A) was also …
Re: USB ISA cards?
Posted on 2022-07-12, 16:30
FreddyV wrote on 2022-07-05, 06:12: The driver just above work only on the lotech board with A1 Wired on the chip. By mistake i tested the CH375216.SYS - on my USBISA card i bought on AliExpress. It works on my 286 10 Mhz machine. I copied PlanetX3 fropm USB to CF. 566KB tok 46Sec. Speed = 12KB/Sec …
Re: USB ISA cards?
Posted on 2022-06-21, 15:13
Did anybody test my driver ? I have tested your drivers v0.21 on my 80286 10Mhz. I tried with the CH375V86.SYS, CH375V88.SYS and the CH375286.SYS. Sadly none of them worked. I got the exact same error on all three drivers. See picture. Suggestion: Maybe you should have a text in each driver telling …
Re: Schneider Euro PC
Posted on 2022-05-29, 14:30
dr.zeissler wrote on 2022-05-29, 13:10: I am thinking about MDA, CGA(RGB), CGA (COMPOSIT) on my EURO-PC. Is it possible to get composit out of the gfx-chip? tereg posted this video in this very thread some time ago: https://www.youtube.com/watch?v=p-E7Qh1hnuM
Re: USB ISA cards?
Posted on 2022-05-27, 16:25
FreddyV wrote on 2022-05-27, 16:03: It is an Hardware problem, some Address lines are not connected. It is corrected in the LoTech design of this board. Most of us Retro fans are able to use a soldering iron. Is the bug anything we can fix ourself?
Re: USB ISA cards?
Posted on 2022-05-27, 11:16
Here is a USBISA card bracket. I am using it. Works fine. https://www.thingiverse.com/thing:5350142
Re: USB ISA cards?
Posted on 2022-05-27, 10:25
FreddyV wrote on 2022-05-25, 17:05: So here is what I did with the Driver 😀 https://youtu.be/WNg8ROz0weg Wow, really nice work. Thank you. Will you be working on making a boot rom?
Re: Schneider Euro PC
Posted on 2022-04-26, 08:48
The actual driver should of course be written in Assembly, but is it possible to conceptualize in Basic that when, let’s say, joy up is read in the port, it would trigger the up arrow keypress? I don't think a DOS driver is feasible. But maybe a patch for games. Like the patches @Cloudschatze makes …
Re: Schneider Euro PC
Posted on 2022-04-26, 08:32
It is possible to remap keyboard with ansi.sys and ANSI ESC codes. If the joystick port is reachable with ANSI ESC codes one could remap them to cursor keys? It's a long shot. Even if it worked in dos, i doubt it work work in games. They are probable programmed to talk directly to 201h.
Re: Schneider Euro PC
Posted on 2022-04-26, 08:02
RetroBard wrote on 2022-04-26, 07:40: The actual driver should of course be written in Assembly, but is it possible to conceptualize in Basic that when, let’s say, joy up is read in the port, it would trigger the up arrow keypress? Is it possible to have a driver like this on an 8088 machine?
Re: Schneider Euro PC
Posted on 2022-04-22, 21:07
The EuroPC part is correct, but I believe their joystick was the exact same common 15-pin PC joystick for both PC and PCII. So for the PCII they did give the y-cable as you wrote, but it also has two 15-pin connectors for normal PC joysticks (and not two 9-pins) Sorry for not letting this go. I …
Re: USB ISA cards?
Posted on 2022-03-24, 18:33
I bought the USB ISA card from Ali Express. I got it to work. DEVICE=CH375DOS.SYS @260 #07 @260 is the IO port you set with the jumpers. 260 is default #07 is the interrupt you choose. No jumpers Just this parameter. Only 3KB of RAM. I tested the device with USB Flash drives and USB to CF Adapter. I …
Re: WP32 McCake : MT32 compatible waveblaster board
Posted on 2022-03-07, 20:08
I just made this video showing my WP32 McCake. Take a look: https://www.youtube.com/watch?v=-iOWCe131QE Also i found out that the MT32-Pi https://github.com/gmcn42/mt32-pi-control#dos-specific-options can take DOS and 4DOS variables as input. For example one can use it to display status info on boot …
Page 2 of 11