VOGONS

Search

Common searches

Search results

Display options

Display options

Re: WP32 McCake : MT32 compatible waveblaster board

Posted on 2021-08-08, 10:36

Hello everyone, I was reading what has been said so far and looking at the project, and a thought occurred to me 🤔: if WP32 McCake is a waveblaster board, then it is inside the pc, why not remove the screen and buttons from the board to get more space to dedicate to the connector for front panel …

ATI chip: which driver to use for Win9x

Posted on 2021-07-19, 15:05

Hello everybody, Granted that I am aware that ATI chips are not the first choice to play in Win9x, I was wondering which drivers (which version) to use in Win9x to get the best results from ATI chips (I have no experience using ATI chips in Win9x, so I ask). For example, which driver (version) would …

Re: McQub : QS1000 based waveblaster module

Posted on 2021-07-15, 08:49

Salient wrote on 2021-07-15, 04:41: igna78 wrote on 2021-07-14, 19:31: How does it sound with Doom? and with old Dos games like Monkey Island? Is there any recording? Thank you 😁 https://www.wavetable.nl/category/comparisons/gamemusic/ 😉 But these are recordings made with McQub? Sorry if I ask but …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-13, 21:46

@shamino, punctual and precise correction, I apologize if I abbreviated by speaking in a generic way of power supply, I assumed it was referring to logic since speaking of the V5500 I said that most of the board's requirements are given through molex. The P2L97 is a card nightmare that I had removed …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-12, 22:11

Thanks, I knew there was something I'd missed, it's an ASUS TUSL2-C There were 4 bulging capacitors which I replaced. After some thought I think I'm going to put the V5 in the motherboard which was initially mentioned, seems more period 'correct'. Thanks, J Granted that I am not a maniac of the …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-12, 21:10

So whilst I have the attention of such a knowledgeable group, if I chose to put the V5-5500 into my Socket 370/Tualatin 1.4GHz/Intel 815EP/Universal AGP PC is that going to be good with the 3.3V too? Given that you shouldn't have any problems (the 815EP chip provides full support for Agp 1.0 and …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-11, 17:59

If you want to try your V5500 without risking (for heaven's sake I understand), then for the test you will need an Agp 1.0 board with good pretensions, let's say that a Riva TNT would be fine (consider that you can only evaluate the supply voltage and not the watts supplied which, however, in the …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-11, 09:03

I read many opinions and would like to ask all of you opinion leaders: Do you have V5500? (well I have three, one of which is a V5800 by oskar) Do you have Asus or Abit motherboards, slot1 or socket370? (well I have boxes full of them and I know their strengths and weaknesses) With these questions I …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-10, 22:51

If you want to make sure your V5500 works great and is safe, use an Abit slot1 or socket370 motherboard .. they all have the agp slot powered at 3.3V (or at most 1.5V and 3.3V). The only FUNDAMENTAL thing, make sure the capacitors are in good condition or have recently been replaced (they are …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-10, 21:39

So your card is basically an Asus CUV4X-C, the chipset is Via Apollo Pro133A, the AGP slot is universal and supports 1.5V and 3.3V up to max speed 4x (so Agp ver. 1.0 and 2.0). Indeed, at that time, the industries to recover components that would otherwise have been lost, recycled universal agp …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-10, 17:53

With a quick search on the mainboard i found out on the asus website that the mainboard has an agp 4x pro slot. Thus it will handle the voodoo 5 just fine (the agp ver. 2.0 in fact does not allow to use the V5500 also for slot coding). The pro extension is for extra power need for professional …

Re: AGP Pro and Voodoo 5 voltages

Posted on 2021-04-10, 17:35

Hi, your motherboard is equipped with universal agp pro slot so it can supply 3.3V and 1.5V power Then you can safely plug in your V5500, which by the way will need to be powered extra via molex For more informati in about agp slot: https://en.m.wikipedia.org/wiki/Accelerated_Graphics_Port

Page 7 of 10

Go to top of page Go to top of page
Close window
Close window