Unicorn #1 - My Gravis Ultrasound collection which I sold for peanuts like 10 years ago. I had a GUS Max, a PnP and 2 Classic GUSes, one early board with those insane amount of capacitors and one later board with way less components. I wish ... I wish I have never sold these! Unicorn #2 - My New Old …

I found these pictures.... They are all that I can find on a short notice. Hope they will give you at least some information. This is awesome! I can definitely see the voltage reg. part # so I can jump on ordering :). I could make out the BIOS code on the IC, I'm not sure if the code is any …

Hi... My board is inside a complete build, so I can not take it out and measure it through. You know, what possible resistors that might be to measure. Yet I will look my stash of photos through, and see if I have something regarding the voltage regulator and so on. Thanks beforehand! What I really …

Tried to revive a C=Plus/4 with water damage. Had to clean lot of rust off during the past couple of days, from the logic board and from all the metal parts which I needed to desolder. Today I soldered in a temporary power plug to be able to use a C=64 PSU and resoldered the RF modulator. …

Tried to revive a C=Plus/4 with water damage. Had to clean lot of rust off during the past couple of days, from the logic board and from all the metal parts which I needed to desolder. Today I soldered in a temporary power plug to be able to use a C=64 PSU and resoldered the RF modulator. …

Cleaned off rust from a C=Plus/4 modulator box. Cleaned off battery acid residue from my ABIT AH4 motherboard. Cleaning will continue once I desolder the battery and will see how many traces I need to repair. Regarding this modo @brostenen, do you still have your AH4T? Shure.... It is happy serving …

Cleaned off rust from a C=Plus/4 modulator box. Cleaned off battery acid residue from my ABIT AH4 motherboard. Cleaning will continue once I desolder the battery and will see how many traces I need to repair. Regarding this modo @brostenen, do you still have your AH4T?

Hey Guys, I'm new to this board and happy that I can be a member! Today just placed an order for an AM27C400 adapter for my TL866II+ EPROM programmer and a KS ROM adapter for my Rev5 Amiga 500 boards. Yesterday, I kind of fixed an internal A500 floppy drive, but it still needs recapping and probably …

brostenen wrote: I think this is the AH4T board. I am just not shure. Anyone know what exact model this is? Unpacked_01.jpg Hi, Do you still have this mobo? Would you help me out with a couple of question about it? I have an AH4 and want to mod it to be a AH4T ... Thanks beforehand!

The capacitor is probably a 10uF 16V one, at least it is on an ABIT AG4 which is a very similar mobo. I still need to know the part # of the voltage regulator. Also, if you have the AH4T and the cap next to the voltage regulator is not 10uF please tell me.

Hello, I have an ESCOM Blackmax 286 mini pc motherboard which not working and I would like to fix. I found no schematic for this on the net, but I know I have at least an SMD cap and a resistor missing from around the power switch connector area. If you have a PC with this mobo and would be so kind …

Hello, I have an ABIT AH4 which a very nice VLB mobo, but is a low cost version of the AH4T and does not come with support for DX4 CPUs and 3.3v, which I would like to have very much :). I'm sure ABIT won't mind :). I know a couple of differences are some missing jumpers, a voltage regulator and an …