It would be slower. The original inner loop is 12 bytes but your changes make it 14 bytes. Are you sure ? I count the same size and my code use faster instructions: mov ax,ES:[DI] 3 mov bl,[si+0000] 4 add al,ES:[bx] 3 mov bl,[si+0000] 4 add ah,ES:[bx] 3 stosw 1 18 es: mov bl,[si+0000] 5 mov al,[bx] …

Hi, it is me again. So, finally, to simplify the test, I added the Frequency change with the Left/Right Keys under the Output device menu :) (For MobyGamer) If you want to test the speed limit, use the Debug Mode. The 2 Counters after the "SlowCnt" are incremented each time the Mixing Code is 1/50s …

Hi, I tried to get MODM22XT working on my IBM PC 5160 but couldn't get it to work; playing a module switches to the pattern/row display but nothing sounds. I don't have a PAS (Quite expensive now :) ) so I don't know what is happening. It is probably because the MODM.CFG File has a problem inside, …

Hi Scali, What do you mean by unrolls the resample loop with fixed indice ? I extend the loop so that I can check if we are too far each 64 samples and not all the time. When I listen at Mod Master and GLX playing at the same frequency rate, GLX has like a small pitch difference, It is difficult to …

Hi, I found that in the Mod Master release I published, I broke the Vibrato when I optimized the partition reading. It is already corrected and I found some other problem present even before (Period not restored after the Vibrato) Not simple, when we touch something, we break something else :) …

Hi, I mix into a single buffer, but there are 4 x 1/50 of second buffers. When the Sound blaster is playing the 1st Buffer, Mod Master is mixing the 4th buffer. For example, If we have this during 4 x 1/50 of Second: 1 : 4 Channels 2 : 3 Channels 3 : 2 Channels 4 : 2 Channels -> This is like mixing …

Hi, Thanks for the test. This module use 5 Octaves and Mod Master is configured to 3 by Default, Go to the options and change The Octaves from 3 to 5 I May put 5 by default Also, this module use BPM at 255 and Tempo 2, this is the fastest possible. I never saw this………

I use 4 buffers of 1/50 of seconds. It is a simple trick used a lot.... This is enaugh to be faster than glx in some cases. Then if it is still too slow, It do not mix the last channels and channels with a small volume during the next buffer. At the end slow volume Channels are in pause during 1/50 …

Hi, If somebody want to test Mod Master 2.2XT, here it is. As it is Mod Master 2.2 Downgrade, There are of course Mod Master 2.2 functions not working anymore. If you can tell me the config you used and the result, it can be great. I forgot something in the attached readme: You need to Tick "DC [ ]" …

Hi, I would not like to release a version with too many bugs and currently, when I change something I add bugs somewhere else. My progress to stabilize it is Slow. The current version is not so bad, but support only Covox on 0388h and Sound Blaster in DMA Auto Init mode. Is there a place where I can …

I published a New Video to Show the progress. https://youtu.be/2eCS_2xB6CA You can see the difference Between Mod Master and GXL Player on the same machine.

Hi, Before adding support for something else, I continue to improve / Optimize the code using SB Autoinit DMA. I successfully added the support for multiple buffers and If the mixing is too slow, it does not play the last channels. Doing this, It is able to play some 8 channels modules at more than …

I checked what is SETDAC It seems it change the I/O for Parallel port in the BIOS variables. Yes, Mod Master read the LPT address in the BIOS Variable, so it will work. But The Tandy DAC is working in DMA as well, I was more thinking about supporting the DMA mode, then be much faster.

Hi again, Somebody asked me the Tandy 1000 DMA DAC support and I see a project for a Covox Sound Master in the forum. I believe Mod Master must support Sound Master :) Can anybody help me to have documentation and to test it ? I checked after I posted it, Mod MAster support Sound Master with Direct …

Galaxy player is doing 15KHz with 8 channels where mod master start to have some glitches a 11KHz. No self modified / Generated code is used so far, not needed. Mod Master is doing unrolled mixing as well, but not fully unrolled as we need to extend the samples too far. (Mixing is done by block of …

Hi, I Just finished to downgrade the code of my .MOD Player to run on a 8086 CPU in CGA. Currently, it can Mix 4 Channels at 22KHz and 8 at 10KHz. I still can optimize it, I was focussed on having it working :) Mod Master play .MOD, .STM, .S3M files (and various other 4 Channels format) I can't …