Photo of the board.

Hello I have a Zida 386 T.1 mainboard with the usual leaking battery damage. The PSU turns on but no BIOS beeps. The BIOS chip works in another computer. I repaired the trace damages but still nothing. I can't find any information on what the jumpers do. Could you tell me what jumpers JP1, JP2, JP10 …

Hello I have a Compumate Super Turbo V mainboard without a BIOS chip. I have a blank Hitachi HN27C64G-15 EPROM that is compatible and I need a standard BIOS that works well in this board. I don't need anything special, just a stock BIOS that fits this 8K chip. (the chip in the mainboard is from …

I decided to get the step down transformer just to be on the safe side. Some of my hardware are too hard to find to risk burning them out. Thanks for the help!

I also have to note that the monitor gets power from the PSU and not directly from the wall socket. It only has the standard PSU monitor AC connector.

I recently got a Casper GM-1489/D monochrome monitor that requires 220VAC. 220VAC was the mains standard here over 30 years ago that changed to 230VAC. I measure 246VAC in the sockets with my multimeter. Can a monitor rated at 220VAC be used safely with that voltage? I had a lot of old incandescent …

Thank you for all your help but I don't think I will be able to find the correct setup without knowing the current configuration of the card. I believe that the DIP switch combination sets the IRQ/DMA/IO and without a manual I'm just shooting blind. I tried 59 combinations so far and none worked.

To be honest I don't really know how to set the correct parameters on the card without a manual. There is a DIP switch too and I have no idea what it does.

NE2000 compatible didn't work but I'll try NE1000.

Too bad it only shows notebook related drivers for Windows and not this card. I tried googling every possible label on the card but no result aside from a russian site claiming this card is from a computer named ACER MPF-PC/710 (PC/710 IIM).

Sorry I missed that. Here is a better picture.

Hello, I recently bought this ethernet card but I don't know if it's working or not. Could you identify it for me? Is there a driver available for Windows 95? It's non-PNP I presume, W95 doesn't detect it. Thanks in advance!