Do you maybe know the values of DIR0 and DIR1 for this CPU? I'm not sure if it's possible to tell the ST from Cx.. Yes, the Cx ID for this CPU is 1F36h Can you please try to manually select the Peripherals screen and take a picture when it crashes? I can not upload files now, anyway... Selecting …

@EcoPeeko Ok, let's do some checks... First of all, when you say that MS-DOS fails to load properly, what do you mean exactly? It throws any error? in that case, what error? the computer hangs? could you explain what happens with details? And, if you can, download the great HWiNFO tool from https:// …

Hi, I'm new to dos and I'm trying to use unisound to configure my pc's pnp soundblaster 16 card (CT2980). How exactly do I install it? The .zip download contains unisound.com - okay - then I put it on a floppy disk and stick it into the pc - so far so good - but then what? Sorry if this is a dumb …

I did a quick test and after running Unisound it seems to work. I could install the drivers and software. However... i have to run Unisound in autoexec.bat before the soundblaster-drivers and programs are loaded... so there is some more testing left. For DOS: Unisound alone does almost everything …

Do you maybe know the values of DIR0 and DIR1 for this CPU? I'm not sure if it's possible to tell the ST from Cx.. Yes, the Cx ID for this CPU is 1F36h Can you please try to manually select the Peripherals screen and take a picture when it crashes? I can not upload files now, anyway... Selecting …

Thak you for this tool! I itested it in a PCChips / Elpina M919 v3.4 board with an "It's ST 486DX100" CPU, without L2 cache module. The CPU model detected in HWiNFO is a Cyrix with 4Kb L1 cache, but in fact this ST CPU has 8Kb. And about 70% of the time when I exit the tool, the computer hangs with …

@OSkar000 For the SB32 (in DOS), you may try Unisound to check if it detects your card (if it does, the card will be initialized): UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.81b

@EcoPeeko If you want it to work easily in DOS (no installation required, only in autoexec.bat if you want), you may try Unisound: https://www.vogons.org/viewtopic.php?f=62&t=72553 For Windows 3.11, just use the included driver as derSammler said for basic mono support. Or if you want to check …

@Kurasiu Hmm.. I checked that the DEVLOAD version I use is newer than the one in the page I posted (In fact I tried it, and it cause my computer to hang.)... I'm sorry. Try the one in this page: https://www.hiren.info/downloads/dos-files There you will also find vide-cdd.sys and atapicd.sys (Both …

@Kurasiu Ok, I compiled a test version for your card to see if this could help you. https://mega.nz/#!5Udhiaob!qneS5oGx-9onKlhnEUC8xRrA0ajnVYwbFUei5KerUIQ To test it with the IDE support, do this: first of all set BLASTER var (with your preferred options): BLASTER=A220 I5 D1 C168 "C" parameter set …

Yes! it is possible. You only have to use a device driver loader like DEVLOAD (http://www.infradead.org/devload/) You could use it as this: DEVLOAD VIDE-CDD.SYS /D:MSCD001 in autoexec.bat, after card PnP initialization I have a question for the OP, could you try my tool Unisound (https://www.vogons. …

i know you said "all x86 cpus" but there's support for 16 bit micros? (8088/86 and 286) Yes! It supports 8088/8086/286 :) I updated the first post to reflect this. (some cards will work well in a 8-bit ISA slot, and some others will not, it depends on the card, if it uses 16 bit lines or not). What …

Hi there! I made a DOS tool for my own use some time ago, but I decided to release it, because I think it may be useful for someone else, so here it is: It is called "Unisound", or Universal ISA PnP Sound Card Driver for DOS. Current version is: v0.81b (Download link at the end of this post) . …