maxtherabbit wrote on 2020-11-13, 20:31: I think you need a new PAL fisherman Can you elaborate what you mean by that? I have a dead awe64 and I'm wondering if that's part of it?

I acquired a clumsyMIDI recently and quickly setup the PI for it. It seems to work well but I noticed many builds using the MT32-PI have buttons for controls and a larger display. So a few questions. 1. Does anyone have a STL file for a case to fit the clumsyMIDI and PI? 2. If I wanted to add …

https://www.amazon.ca/gp/product/B000JFJZGG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Syba SD-VIA-5U 5-Port (4+1) USB 2.0 PCI Card, VIA VT6212 Chip I'm using this in my P3B-F, it's working great here. I've got a older Socket 3 PC Chips board coming and will test it with that and let you know in …

I had to use dos utils to get it to work, CTCM.EXE to configure the card in DOS then I had to load AWEUTIL.COM to get midi to work. Depending on the game I had to provide different switches, and not always successful.

I have a ct4520 that does not detect the wave portion of the card. There are two capacitors near what I think is the midi portion, see attached image. The capacitors are not bulged, but there is corrosion on the cap. The card is a bit dirty, but I recall someone on here posting that a component …

Hey all, I wanted to provide an update. Hi, I wanted to let you know because you were so kind to respond that I’ve tested with some other EDO memory modules I found around. It recognized a 8MB of RAM chip that I installed in the CT4380 with the value firmware. Without it it only recognized 512K …

I got this board that seems to work in dos with minimal testing (ran doom quite nicely) I tried to load Windows and I got not enough memory, even in safe mode. Suspect this is due to the shared video memory not being properly reserved in DOS? The processor is a Dual Core Atom 330 with the Intel …

Just stumbled across this product, I think it's made my wish list. Found one for 250USD. I'll keep an eye out. 20MB/sec transfer rates and up to 16MB Cache https://web.archive.org/web/19971011212939/ht … DE4030PLUS.html

Thanks, found a EIDE2300+ locally, I appreciate the tip. https://web.archive.org/web/19970607082226/http://www.promise.com:80/html/sales/EIDE2300PLUS-Launch.html "EIDE serves as a realistic way to extend the life of the IDE interface and supports the growth of the 32-bit VL bus architecture which we …

I have a board on order 80486VIP, from the information I can gleam it has onboard IDE supporting PIO MODE 3 at 11.1MB/sec I know VLB had a short lived lifespan for a interface on computers, and I'm wondering if anything out there was faster of if I'm best with just using the onboard IDE for this …

maxtherabbit wrote on 2021-11-04, 14:38: I have an AWE64 Value (don't remember the CT number) and it works perfectly with a 32MB SIMM Are you able to provide a link to the chips you used? I can't find any 32MB modules with the supported chips. I did order a 16MB one a few moments ago but I can …

Sorry, yes the SIMMCONN is set for 32MB. I reached out to the good folks at Serda Shop and they sent me this info. It seems the 'value' is only listing 16MB modules as successful and it's a guess on the 'standard' version of the card. the green V is a 'Value' firmware, CT4520 is a value version, so …

No jumpers on the card that I can see, only one is to enable/disable the ASP chip (there is none).

I purchased of a local user a SB Awe 64 CT4380 and a SIMMCONN with 32MB EDO. Every test I try I'm only getting 4MB of RAM from my AWE Card, this leads me to suspect the SIMMCONN or RAM is not functional. I've also tested the same SIMMCONN on a CT4520 with identical results. The memory module has the …

I've got this loaded, P3B-F, P3-500Mhz, Radeon 9200SE AGP. It hangs on load 🙁 works great in dos box. The screen goes dim, once I had it load the menu but then it froze. Waiting to load Main UI... Red bar is full, screen is dim. It seems to never load.

If you're looking for a MS DOS launcher, I found it... Here is a video online, it's still young and new but please give it a like and bump: https://www.youtube.com/watch?v=LJ1fFGvar1k https://external.fxds1-1.fna.fbcdn.net/safe_image.php?d=AQG4sPF9M7QEEha6&w=480&h=250&url=https%3A%2F%2Fi.ytimg.com% …