Is there a modesetting utility for the Paradise card that can be run, possibly with an option to save settings to an onboard EEPROM ? I am not familiar with such - at least the original PC did not have any that I would know of. For more information, the PC is from 1990+- 1 year, before VESA support …

Linking back to here: raised this for consideration on the OSSC Feature Requests forum: https://videogameperfection.com/forums/topic/ … frame-dropping/ . Let's see what they think. 🙏

Thanks all for the interesting discussion! This quite exhaustively clarified a lot of the details I was missing.

Hi all, I recently got an OSSC converter for VGA -> HDMI. Pairing that with my BenQ BL3201PT 32" 4K display. https://www.displayspecifications.com/en/model/df62527 OSSC upscales the signal to proper VGA aspect ratio with 5:6 pixels, which is great. I get pillarboxes on left and right of the 16:9 …

Thanks for the great answer! I think I got a much better picture of this now! The BIOS will not put normal (read-write) RAM there. EMM386 takes care of creating UMBs by using features of the 386 processor to map virtual accesses to that 384KB region to either the same physical addresses (if there is …

Hello, I am trying to wrap my head around the mechanism that Boot ROMs work, in particular around booting and BIOS. After watching videos on the topic and reading XT-IDE and other BIOS ROM product pages, there are still some things I'm a bit uncertain about. Actually, quite a few things. 1) If I …

I was able to create a 3.5" 720KB DOS boot disk on another system, but I am now struggling with being able to boot it on the XT. My only IO controller is a 386-era 16-bit ISA 1.44MB 3.5" HD floppy controller, and it does not look like it has jumper configuration to downgrade itself to driving a 3.5" …

Be aware that you need a high density floppy drive controller to read 1.44 MB/1.2 MB HD disks. Even if you have a HD drive, it will not read HD disks without such a controller. (It will just function as a DD drive.) You do not only need a high density floppy controller (which you could find on any …

You mention you stuck an AT keyboard in it. It's an XT so needs an XT keyboard. Check if your keyboard has an XT switch on the bottom of it. You'll get nothing out of an XT with an AT keyboard. No idea what the beep codes mean, could be keyboard, could be RAM. The few DTK BIOS board I've dealt with …

I have one of these boards. I believe this is the manual: http://www.minuszerodegrees.net/manuals/Turbo-XT%20Main%20Board%20-%20Installation%20Guide.pdf ETA: Added picture of my board Really great to hear - I hope you may be lurking around in case I need help cross-referencing something. Actually, …

It's not the cause of your issue, but you are not supposed to jumper "Color 80x25" unless you use an actual CGA card. The mainboard BIOS has an integrated CGA and MDA video BIOS. The DIP switches are supposed to mean: Color 40x25: Use integrated CGA BIOS, boot in 40x25 mode (mode 1) Color 80x25: …

So I'd get a brown paper, kraft paper bag, get it folded twice (four thicknesses of paper, if you're using an edge of the bag rather than having it opened out, you've got one fold already there) then surface wet that both sides with IPA and shove it in and out of 3 of the middle slots. Sometimes …

Hi all, I found this 8088 PC that was stored for a few decades on a shelf of a wooden cabin (out from direct rain and sun exposure, but cold outdoors storage with no insulation, so rain humidity would get in) Looking at the board, it has the following markings: 8MHz Turbo Board Pim-Turbo Copyright …

Thanks all, very interesting info! From article on CNET MS-DOS. MS-DOS 5x and later can handle four-digit years, and gets its date information from the PC's RTC/BIOS. MS-DOS will reject two-digit years from 00 79. The operational range goes to the year 2035. Earlier MS-DOS versions are not compliant …

It's likely the BIOS that's the culprit. Unfortunately, I have no idea what version you're using. (copy-pasting from my other thread:) The PC is a "MikroMikko 4 m 326SX" model from a Finnish company "Nokia Data" (some kind of sibling/subsidiary at the time to the big Nokia iiuc). It has a 386 25MHz …

Update: Tried flashing FreeDOS image to the disk from https://www.pcengines.ch/freedos.htm But then at boot, got an error "Invalid or damaged Bootable partition". However, after that flash, I * was* able to install DOS from floppies, on a primary partition of size 128MB. Although kept getting write …

Hi all, I am setting up an old 386 system, and trying to replace the spinning hard drive with a CF card. I got a DeLock IDE -> CF adapter card with a 4GB Transcend CF card. Attached photos of the hardware. BIOS recognizes the disk, but setting it to autodetect fails with the following boot errors: …

Hi all, recently dusted off an old 386 system and bringing it back to life. So much fun :) The PC is a "MikroMikko 4 m 326SX" model from a Finnish company "Nokia Data" (some kind of sibling/subsidiary at the time to the big Nokia iiuc). It has a 386 25MHz CPU with 8MB of RAM. The BIOS is from …