First post, by Intel486dx33
Hi guys,
Here is my “Made in USA” 486 component Build.
Specs:
* Motherboard - Atrend 4GPV3 486 VESA Motherboard
http://www.elhvb.com/webhq/models/486vlb2/4gpv3.html
( A.K.A. VLB Galaxy 486V1 )
( A.K.A. - MB-486-CONTAQ 012093 U4L2-0 )
( A.K.A. - Mecer B860 )
- BIOS ID string X0-0100-001117-00101111-060692-CTQ596-F
- 8-30 pin SIMM slots (1-128meg FPM DRAM)
- 2-32bit VESA Local Bus slots
- 8-16bit ISA slots
- 64-256k cache support in 8-28pin sockets + 1 TAG RAM sockets
- AMI/Award/MR Bios
- CONTAQ 82C596 A Chipset ( German )
- Supports the following cpu's at 25/33/40/50/66MHz
INTEL 80486SX/80486DX/80486DX2, P24C, P24T
CYRIX CX486M6, CX486M7
AMD AM486DX/DX2
- Green PC Connector
- Manufactured by: Atrend Technology Co. Ltd. or VisionEx + CTL corp. USA 1993
Actually, This motherboard was branded by several USA companies including: Atrend, Mecer, and VisionEx.
* CPU - IBM Blue Lighting 486 dx2-66 - USA
* RAM - 16mb 60ns FPM 30-pin ( MT or Texas Instruments ) ( 4mb x 4 ) - USA
* Cache - 256kb -20ns
* Hard-drive - Conner 540mb IDE - USA
* Controller - VLB Acculogic sIDE-4/VI - ( Canada )
* Video card - Tseng 1mb. ( ISA ) - USA
* Video card - Cirrus Logic CL GD-5426 - USA
* Video card - Diamond Stealth 24VL VLB S3 805 - USA
* Audio card - Media Vision PAS-16 - USA
* Network Card - 3com Etherlink III 3c509b - USA
Other parts:
* Case OEM and Lan Li Aluminum
* CDROM - 32x
* Floppy drive - 1.44