Dosbox crashes while switching from full screen to windowed on Linux Mint on external vga crt monitor \ VOGONS

Dosbox crashes while switching from full screen to windowed on Linux Mint on external vga crt monitor

Topic actions

First post, by petran79

Posted on 2024-05-22, 16:37

petran79 Offline

Rank Newbie

Rank: Newbie
Posts: 11
Joined: 2017-12-01, 17:52

I have a vga crt monitor connected to the laptop. I have disabled the laptop monitor. I set various custom resolutions at xorg.conf file. Laptop has an nvidia card with 550 drivers installed.

When I run dosbox it switches to fullscreen fine. Though if I exit the app, resolution remains at 640x400, the one DOSBOX autoswitched to. However when I try to launch a game it fails to switch to fullscreen and I get a black screen, though I can hear the sound. In windowed mode game runs fine. But when I press alt-enter to switch to fullscreen dosbox crashes

1DOSBox version 0.74-3
2Copyright 2002-2019 DOSBox Team, published under GNU GPL.
3---
4CONFIG:Loading primary settings from config file /home/petros/.dosbox/dosbox-0.74-3.conf
5MIXER:Got different values from SDL: freq 44100, blocksize 512
6ALSA:Can't subscribe to MIDI port (65:0) nor (17:0)
7MIDI:Opened device:oss
8One joystick reported, initializing with 4axis
9Using joystick ST LIS3LV02DL Accelerometer with 3 axes, 0 buttons and 0 hat(s)
10DOSBox switched to max cycles, because of the setting: cycles=auto. If the game runs too fast try a fixed cycles amount in DOSBox's options.
11Warning: file creation failed: /mnt/7571a82e-f4bb-4ae8-90aa-252228c292c7/msdos/PSYCPIN/OTHER/HISCORES.FLG
12X Error of failed request:  BadValue (integer parameter out of range for operation)
13  Major opcode of failed request:  153 (XFree86-VidModeExtension)
14  Minor opcode of failed request:  10 (XF86VidModeSwitchToMode)
15  Value in failed request:  0x26b
16  Serial number of failed request:  406
17  Current serial number in output stream:  408
18
19Same when I run Dosbox in fullscreen and press alt-Enter for windowed mode. Or when I run in windowed mode and try to enter full screen and then back to windowed mode.
20
21dosbox
22DOSBox version 0.74-3
23Copyright 2002-2019 DOSBox Team, published under GNU GPL.
24---
25CONFIG:Loading primary settings from config file /home/petros/.dosbox/dosbox-0.74-3.conf
26MIXER:Got different values from SDL: freq 44100, blocksize 512
27ALSA:Can't subscribe to MIDI port (65:0) nor (17:0)
28MIDI:Opened device:oss
29One joystick reported, initializing with 4axis
30Using joystick ST LIS3LV02DL Accelerometer with 3 axes, 0 buttons and 0 hat(s)
31X Error of failed request:  BadValue (integer parameter out of range for operation)
32  Major opcode of failed request:  153 (XFree86-VidModeExtension)
33  Minor opcode of failed request:  10 (XF86VidModeSwitchToMode)
34  Value in failed request:  0x3c0001c
35  Serial number of failed request:  353
36  Current serial number in output stream:  355
37
38When I disable the CRT monitor and use the laptops LCD monitor, DOSBOX tries to switch to the CRT monitor, despite the fact it is deactivated. If I disconnect it completely, LCD monitor becomes black. Only if I reconnect it does the fullscreen image appear on CRT monitor but with the above issues. I guess xorg redirects dosbox to the crt monitor as that resolution is not available to the CRT
39
40
41
42# This is the configuration file for DOSBox 0.74-3. (Please use the latest version of DOSBox)
43# Lines starting with a # are comment lines and are ignored by DOSBox.
44# They are used to (briefly) document the effect of each option.
45
46[sdl]
47#       fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
48#       fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.
49#   fullresolution: What resolution to use for fullscreen: original, desktop or fixed size (e.g. 1024x768).
50#                     Using your monitor's native resolution (desktop) with aspect=true might give the best results.
51#                     If you end up with small window on a large screen, try an output different from surface.
52#                     On Windows 10 with display scaling (Scale and layout) set to a value above 100%, it is recommended
53#                     to use a lower full/windowresolution, in order to avoid window size problems.
54# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
55#                     (output=surface does not!)
56#           output: What video system to use for output.
57#                   Possible values: surface, overlay, opengl, openglnb.
58#         autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
59#      sensitivity: Mouse sensitivity.
60#      waitonerror: Wait before closing the console if dosbox has an error.

…Show last 231 lines

61#         priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
62#                     pause is only valid for the second entry.
63#                   Possible values: lowest, lower, normal, higher, highest, pause.
64#       mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the default value.
65#     usescancodes: Avoid usage of symkeys, might not work on all operating systems.
66
67fullscreen=false
68fulldouble=false
69fullresolution=original
70windowresolution=original
71output=opengl
72autolock=true
73sensitivity=100
74waitonerror=true
75priority=higher,normal
76mapperfile=mapper-0.74-3.map
77usescancodes=true
78
79[dosbox]
80# language: Select another language file.
81#  machine: The type of machine DOSBox tries to emulate.
82#           Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
83# captures: Directory where things like wave, midi, screenshot get captured.
84#  memsize: Amount of memory DOSBox has in megabytes.
85#             This value is best left at its default to avoid problems with some games,
86#             though few games might require a higher value.
87#             There is generally no speed advantage when raising this value.
88
89language=
90machine=svga_s3
91captures=capture
92memsize=16
93
94[render]
95# frameskip: How many frames DOSBox skips before drawing one.
96#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!
97#    scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended,
98#              then the scaler will be used even if the result might not be desired.
99#              To fit a scaler in the resolution used at full screen may require a border or side bars,
100#              to fill the screen entirely, depending on your hardware, a different scaler/fullresolution might work.
101#            Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.
102
103frameskip=0
104aspect=false
105scaler=none
106
107[cpu]
108#      core: CPU Core used in emulation. auto will switch to dynamic if available and
109#            appropriate.
110#            Possible values: auto, dynamic, normal, simple.
111#   cputype: CPU Type used in emulation. auto is the fastest choice.
112#            Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
113#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.
114#            Setting this value too high results in sound dropouts and lags.
115#            Cycles can be set in 3 ways:
116#              'auto'          tries to guess what a game needs.
117#                              It usually works, but can fail for certain games.
118#              'fixed #number' will set a fixed amount of cycles. This is what you usually
119#                              need if 'auto' fails. (Example: fixed 4000).
120#              'max'           will allocate as much cycles as your computer is able to
121#                              handle.
122#            Possible values: auto, fixed, max.
123#   cycleup: Amount of cycles to decrease/increase with keycombos.(CTRL-F11/CTRL-F12)
124# cycledown: Setting it lower than 100 will be a percentage.
125
126core=auto
127cputype=auto
128cycles=auto
129cycleup=10
130cycledown=20
131
132[mixer]
133#   nosound: Enable silent mode, sound is still emulated though.
134#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
135#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
136# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
137#            Possible values: 1024, 2048, 4096, 8192, 512, 256.
138# prebuffer: How many milliseconds of data to keep on top of the blocksize.
139
140nosound=false
141rate=44100
142blocksize=1024
143prebuffer=25
144
145[midi]
146#     mpu401: Type of MPU-401 to emulate.
147#             Possible values: intelligent, uart, none.
148# mididevice: Device that will receive the MIDI data from MPU-401.
149#             Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
150# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use
151#               (find the id with mixer/listmidi).
152#               Or in the case of coreaudio, you can specify a soundfont here.
153#               See the README/Manual for more details.
154
155mpu401=intelligent
156mididevice=default
157midiconfig=
158
159[sblaster]
160#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
161#          Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
162#  sbbase: The IO address of the soundblaster.
163#          Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
164#     irq: The IRQ number of the soundblaster.
165#          Possible values: 7, 5, 3, 9, 10, 11, 12.
166#     dma: The DMA number of the soundblaster.
167#          Possible values: 1, 5, 0, 3, 6, 7.
168#    hdma: The High DMA number of the soundblaster.
169#          Possible values: 1, 5, 0, 3, 6, 7.
170# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
171# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
172#          Possible values: auto, cms, opl2, dualopl2, opl3, none.
173#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
174#          Possible values: default, compat, fast.
175# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
176#          Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
177
178sbtype=sb16
179sbbase=220
180irq=7
181dma=1
182hdma=5
183sbmixer=true
184oplmode=auto
185oplemu=default
186oplrate=44100
187
188[gus]
189#      gus: Enable the Gravis Ultrasound emulation.
190#  gusrate: Sample rate of Ultrasound emulation.
191#           Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
192#  gusbase: The IO base address of the Gravis Ultrasound.
193#           Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
194#   gusirq: The IRQ number of the Gravis Ultrasound.
195#           Possible values: 5, 3, 7, 9, 10, 11, 12.
196#   gusdma: The DMA channel of the Gravis Ultrasound.
197#           Possible values: 3, 0, 1, 5, 6, 7.
198# ultradir: Path to Ultrasound directory. In this directory
199#           there should be a MIDI directory that contains
200#           the patch files for GUS playback. Patch sets used
201#           with Timidity should work fine.
202
203gus=true
204gusrate=44100
205gusbase=240
206gusirq=5
207gusdma=3
208ultradir=C:\ULTRASND
209
210[speaker]
211# pcspeaker: Enable PC-Speaker emulation.
212#    pcrate: Sample rate of the PC-Speaker sound generation.
213#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
214#     tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
215#            Possible values: auto, on, off.
216# tandyrate: Sample rate of the Tandy 3-Voice generation.
217#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
218#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
219
220pcspeaker=true
221pcrate=44100
222tandy=auto
223tandyrate=44100
224disney=true
225
226[joystick]
227# joysticktype: Type of joystick to emulate: auto (default), none,
228#               2axis (supports two joysticks),
229#               4axis (supports one joystick, first joystick used),
230#               4axis_2 (supports one joystick, second joystick used),
231#               fcs (Thrustmaster), ch (CH Flightstick).
232#               none disables joystick emulation.
233#               auto chooses emulation depending on real joystick(s).
234#               (Remember to reset dosbox's mapperfile if you saved it earlier)
235#               Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
236#        timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
237#     autofire: continuously fires as long as you keep the button pressed.
238#       swap34: swap the 3rd and the 4th axis. Can be useful for certain joysticks.
239#   buttonwrap: enable button wrapping at the number of emulated buttons.
240
241joysticktype=auto
242timed=true
243autofire=false
244swap34=false
245buttonwrap=false
246
247[serial]
248# serial1: set type of device connected to com port.
249#          Can be disabled, dummy, modem, nullmodem, directserial.
250#          Additional parameters must be in the same line in the form of
251#          parameter:value. Parameter for all types is irq (optional).
252#          for directserial: realport (required), rxdelay (optional).
253#                           (realport:COM1 realport:ttyS0).
254#          for modem: listenport (optional).
255#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
256#                         transparent, port, inhsocket (all optional).
257#          Example: serial1=modem listenport:5000
258#          Possible values: dummy, disabled, modem, nullmodem, directserial.
259# serial2: see serial1
260#          Possible values: dummy, disabled, modem, nullmodem, directserial.
261# serial3: see serial1
262#          Possible values: dummy, disabled, modem, nullmodem, directserial.
263# serial4: see serial1
264#          Possible values: dummy, disabled, modem, nullmodem, directserial.
265
266serial1=dummy
267serial2=dummy
268serial3=disabled
269serial4=disabled
270
271[dos]
272#            xms: Enable XMS support.
273#            ems: Enable EMS support.
274#            umb: Enable UMB support.
275# keyboardlayout: Language code of the keyboard layout (or none).
276
277xms=true
278ems=true
279umb=true
280keyboardlayout=auto
281
282[ipx]
283# ipx: Enable ipx over UDP/IP emulation.
284
285ipx=false
286
287[autoexec]
288# Lines in this section will be run at startup.
289# You can put your MOUNT lines here.
290
291mount C "/mnt/7571a82e-f4bb-4ae8-90aa-252228c292c7/msdos" -freesize 500

do not know if it helps, but here is the xorg.conf file too

1Section "Monitor"
2
3HorizSync       30.0 - 70.0	   
4VertRefresh     50.0 - 160.0
5
6   Identifier    "Monitor0"
7
8Modeline "256x240_160.00"   13.50  256 264 288 320  240 243 253 267 -hsync +vsync
9Modeline "288x240_160.00"   15.50  288 304 328 368  240 243 253 267 -hsync +vsync
10Modeline "288x240_124.00"   11.25  288 296 320 352  240 243 253 261 -hsync +vsync
11Modeline "296x240_124.00"   11.50  296 304 328 360  240 243 253 261 -hsync +vsync
12Modeline "296x240_160.00"   16.00  296 312 336 376  240 243 253 267 -hsync +vsync
13Modeline "304x240_124.00"   11.75  304 312 336 368  240 243 253 261 -hsync +vsync
14Modeline "304x240_160.00"   16.25  304 320 344 384  240 243 253 267 -hsync +vsync
15Modeline "320x200_140.00"   12.25  320 336 360 400  200 203 209 220 -hsync +vsync
16Modeline "320x200_160.00"   14.00  320 336 360 400  200 203 209 223 -hsync +vsync
17Modeline "320x224_150.00"   14.75  320 336 360 400  224 227 237 248 -hsync +vsync
18Modeline "320x224_160.00"   15.75  320 336 360 400  224 227 237 249 -hsync +vsync
19Modeline "320x240_140.00"   14.50  320 336 360 400  240 243 247 264 -hsync +vsync
20Modeline "320x240_142.00"   14.75  320 336 360 400  240 243 247 264 -hsync +vsync
21Modeline "320x512_100.00"   22.50  320 336 368 416  512 515 525 545 -hsync +vsync
22Modeline "320x512_120.00"   27.50  320 336 368 416  512 515 525 552 -hsync +vsync
23Modeline "320x240_160.00"   17.00  320 336 360 400  240 243 247 267 -hsync +vsync
24Modeline "320x256_160.00"   18.75  320 336 368 416  256 259 266 284 -hsync +vsync
25Modeline "336x288_160.00"   22.00  336 352 384 432  288 291 301 320 -hsync +vsync
26Modeline "384x240_160.00"   21.00  384 408 440 496  240 243 249 267 -hsync +vsync
27Modeline "384x240_122.00"   15.25  384 400 432 480  240 243 249 261 -hsync +vsync
28Modeline "400x300_150.00"   25.25  400 424 456 512  300 303 307 331 -hsync +vsync
29Modeline "432x243_140.00"   20.25  432 448 488 544  243 246 251 267 -hsync +vsync
30Modeline "496x384_120.00"   31.75  496 520 568 640  384 387 397 415 -hsync +vsync
31Modeline "512x288_160.00"   34.25  512 544 592 672  288 291 296 320 -hsync +vsync
32Modeline "600x200_140.00"   22.75  600 616 672 744  200 203 213 220 -hsync +vsync
33Modeline "600x200_150.00"   24.50  600 616 672 744  200 203 213 222 -hsync +vsync
34Modeline "600x224_120.00"   21.50  600 616 672 744  224 227 237 244 -hsync +vsync
35Modeline "600x224_121.00"   21.75  600 616 672 744  224 227 237 244 -hsync +vsync
36Modeline "600x224_122.00"   22.00  600 616 672 744  224 227 237 244 -hsync +vsync
37Modeline "600x224_123.00"   22.25  600 616 672 744  224 227 237 244 -hsync +vsync
38Modeline "600x224_124.00"   22.25  600 616 672 744  224 227 237 244 -hsync +vsync
39Modeline "600x224_125.00"   22.50  600 616 672 744  224 227 237 244 -hsync +vsync
40Modeline "600x224_130.00"   23.50  600 616 672 744  224 227 237 245 -hsync +vsync
41Modeline "600x224_140.00"   26.00  600 624 680 760  224 227 237 246 -hsync +vsync
42Modeline "600x240_120.00"   23.00  600 616 672 744  240 243 253 261 -hsync +vsync
43Modeline "600x240_121.00"   23.25  600 616 672 744  240 243 253 261 -hsync +vsync
44Modeline "600x240_122.00"   23.50  600 616 672 744  240 243 253 261 -hsync +vsync
45Modeline "600x240_123.00"   23.75  600 616 672 744  240 243 253 261 -hsync +vsync
46Modeline "600x240_124.00"   24.00  600 616 672 744  240 243 253 261 -hsync +vsync
47Modeline "600x240_125.00"   24.25  600 616 672 744  240 243 253 261 -hsync +vsync
48Modeline "600x240_160.00"   33.00  600 632 688 776  240 243 253 267 -hsync +vsync
49Modeline "768x240_122.00"   30.50  768 792 864 960  240 243 253 261 -hsync +vsync
50Modeline "1024x240_122.00"   40.50  1024 1056 1152 1280  240 243 253 261 -hsync +vsync
51Modeline "1280x240_122.00"   50.75  1280 1320 1440 1600  240 243 253 261 -hsync +vsync
52Modeline "512x384_160.00"   45.50  512 544 592 672  384 387 391 425 -hsync +vsync
53Modeline "640x200_160.00"   29.00  640 664 728 816  200 203 213 223 -hsync +vsync
54Modeline "640x224_100.00"   19.00  640 664 720 800  224 227 237 241 -hsync +vsync
55Modeline "640x224_124.00"   24.00  640 664 720 800  224 227 237 244 -hsync +vsync
56Modeline "640x224_121.00"   23.50  640 664 720 800  224 227 237 244 -hsync +vsync
57Modeline "640x224_122.00"   23.50  640 664 720 800  224 227 237 244 -hsync +vsync
58Modeline "640x224_123.00"   23.75  640 664 720 800  224 227 237 244 -hsync +vsync
59Modeline "640x240_122.00"   25.25  640 664 720 800  240 243 253 261 -hsync +vsync
60Modeline "640x256_160.00"   37.75  640 672 736 832  256 259 269 284 -hsync +vsync

…Show last 68 lines

61Modeline "640x350_70.00"   20.50  640 664 720 800  350 353 363 368 -hsync +vsync
62Modeline "640x350_160.00"   52.50  640 680 744 848  350 353 363 388 -hsync +vsync
63Modeline "640x400_69.00"   23.00  640 664 720 800  400 403 409 419 -hsync +vsync
64Modeline "640x400_70.00"   23.25  640 664 720 800  400 403 409 420 -hsync +vsync
65Modeline "640x400_71.00"   23.75  640 664 720 800  400 403 409 420 -hsync +vsync
66Modeline "640x400_72.00"   24.00  640 664 720 800  400 403 409 420 -hsync +vsync
67Modeline "640x400_75.00"   25.00  640 664 720 800  400 403 409 421 -hsync +vsync
68Modeline "640x400_140.00"   51.75  640 680 744 848  400 403 409 437 -hsync +vsync
69Modeline "640x400_141.00"   52.00  640 680 744 848  400 403 409 437 -hsync +vsync
70Modeline "640x400_142.00"   52.50  640 680 744 848  400 403 409 438 -hsync +vsync
71Modeline "640x400_150.00"   55.75  640 680 744 848  400 403 409 440 -hsync +vsync
72Modeline "640x480_70.00"   28.00  640 664 720 800  480 483 487 503 -hsync +vsync
73Modeline "640x480_72.00"   29.50  640 664 728 816  480 483 487 503 -hsync +vsync
74Modeline "640x480_75.00"   30.75  640 664 728 816  480 483 487 504 -hsync +vsync
75Modeline "640x480_85.00"   35.00  640 664 728 816  480 483 487 507 -hsync +vsync
76Modeline "640x480_100.00"   42.50  640 672 736 832  480 483 487 512 -hsync +vsync
77Modeline "640x480_120.00"   52.50  640 680 744 848  480 483 487 518 -hsync +vsync
78Modeline "640x480_125.00"   54.75  640 680 744 848  480 483 487 519 -hsync +vsync
79Modeline "640x480_130.00"   57.25  640 680 744 848  480 483 487 521 -hsync +vsync
80Modeline "640x480_133.00"   58.75  640 680 744 848  480 483 487 522 -hsync +vsync
81Modeline "640x480_136.00"   60.00  640 680 744 848  480 483 487 523 -hsync +vsync
82Modeline "640x512_120.00"   56.00  640 680 744 848  512 515 522 552 -hsync +vsync
83Modeline "640x512_100.00"   45.25  640 672 736 832  512 515 522 545 -hsync +vsync
84Modeline "720x400_72.00"   27.00  720 744 808 896  400 403 413 420 -hsync +vsync
85Modeline "720x480_130.00"   64.75  720 768 840 960  480 483 493 521 -hsync +vsync
86Modeline "640x528_100.00"   47.50  640 680 744 848  528 531 541 562 -hsync +vsync
87Modeline "640x528_120.00"   57.75  640 680 744 848  528 531 541 569 -hsync +vsync
88Modeline "800x600_70.00"   45.50  800 840 920 1040  600 603 607 628 -hsync +vsync
89Modeline "800x600_72.00"   47.00  800 840 920 1040  600 603 607 628 -hsync +vsync
90Modeline "800x600_75.00"   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync
91Modeline "800x600_85.00"   56.75  800 848 928 1056  600 603 607 633 -hsync +vsync
92Modeline "800x600_100.00"   67.25  800 848 928 1056  600 603 607 639 -hsync +vsync
93Modeline "800x600_105.00"   72.00  800 856 936 1072  600 603 607 640 -hsync +vsync
94Modeline "800x600_108.00"   74.00  800 856 936 1072  600 603 607 642 -hsync +vsync
95Modeline "992x768_57.66"   59.50  992 1048 1144 1296  768 771 781 797 -hsync +vsync
96Modeline "1024x768_70.00"   75.25  1024 1080 1184 1344  768 771 775 802 -hsync +vsync
97Modeline "1024x768_72.00"   78.50  1024 1088 1192 1360  768 771 775 803 -hsync +vsync
98Modeline "1024x768_75.00"   82.00  1024 1088 1192 1360  768 771 775 805 -hsync +vsync
99Modeline "1024x768_85.00"   94.50  1024 1096 1200 1376  768 771 775 809 -hsync +vsync
100Modeline "1152x864_70.00"   96.75  1152 1224 1344 1536  864 867 871 902 -hsync +vsync
101Modeline "1152x864_72.00"   99.75  1152 1224 1344 1536  864 867 871 903 -hsync +vsync
102Modeline "1152x864_75.00"  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync
103Modeline "1280x256_160.00"   75.50  1280 1344 1472 1664  256 259 269 284 -hsync +vsync
104Modeline "1280x512_120.00"  113.25  1280 1368 1496 1712  512 515 525 552 -hsync +vsync
105Modeline "1280x512_100.00"   91.50  1280 1352 1480 1680  512 515 525 545 -hsync +vsync
106Modeline "1280x800_70.00"   99.00  1280 1360 1488 1696  800 803 809 836 -hsync +vsync
107Modeline "1280x960_70.00"  120.00  1280 1368 1496 1712  960 963 967 1002 -hsync +vsync
108Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
109Modeline "1280x1024_65.00"  118.50  1280 1368 1496 1712  1024 1027 1034 1066 -hsync +vsync
110Modeline "1920x1080_72.00"  210.25  1920 2056 2256 2592  1080 1083 1088 1128 -hsync +vsync
111Modeline "1920x1080_74.00"  217.75  1920 2064 2264 2608  1080 1083 1088 1129 -hsync +vsync
112Modeline "1920x1080_75.00"  220.75  1920 2064 2264 2608  1080 1083 1088 1130 -hsync +vsync
113Modeline "2560x240_122.00"  102.00  2560 2632 2888 3216  240 243 253 261 -hsync +vsync
114EndSection
115
116Section "Device"
117   Identifier   "Device0"
118   Driver   "nvidia"   	
119Option "UseEdidFreqs" "false"		
120EndSection
121
122Section "Screen"
123   Identifier   "Screen0"
124   Device   "Device0"
125   Monitor   "Monitor0"
126   Option   "metamodes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
127   Option "ModeValidation" "AllowNonEdidModes"   		
128EndSection

Go to top of page Go to top of page

Back to DOSBox General