The Horde speed trouble \ VOGONS

The Horde speed trouble

Topic actions

Post a reply

First post, by Peanutman

Posted on 2004-09-05, 11:57

Peanutman Offline

Rank Newbie

Rank: Newbie
Posts: 1
Joined: 2004-09-05, 11:47

i just started DosBox for the first time today
it looks so cool, finaly a program that can run The Horde for me :p
but i have a question:

The Horde finaly works,after disabling that gus thing, but it runs kinda slow... unplayable slow...
what can i do about it? i mean, if it can run on a pc from 1993 with a normal speed, it should also work here :p

here is my config file:

1[sdl]
2# fullscreen -- Start dosbox directly in fullscreen.
3# fulldouble -- Use double buffering in fullscreen.
4# fullfixed -- Don't resize the screen when in fullscreen.
5# fullwidth/height -- What resolution to use for fullscreen, use together with fullfixed.
6# output -- What to use for output: surface,overlay,opengl,openglnb.
7# hwscale -- Extra scaling of window if the output device supports hardware scaling.
8# autolock -- Mouse will automatically lock, if you click on the screen.
9# sensitiviy -- Mouse sensitivity.
10# waitonerror -- Wait before closing the console if dosbox has an error.
11
12fullscreen=true
13fulldouble=false
14fullfixed=false
15fullwidth=0
16fullheight=0
17output=surface
18hwscale=1.00
19autolock=true
20sensitivity=100
21waitonerror=true
22
23[dosbox]
24# language -- Select another language file.
25# memsize -- Amount of memory dosbox has in megabytes.
26# machine -- The type of machine tries to emulate:auto,hercules,cga,tandy,vga.
27#            Try a specific type if your game has problems with auto.
28
29language=
30machine=auto
31memsize=32
32
33[render]
34# frameskip -- How many frames dosbox skips before drawing one.
35# snapdir -- Directory where screenshots get saved.
36# aspect -- Do aspect correction.
37# scaler -- Scaler used to enlarge/enhance low resolution modes.
38#           Supported are none,normal2x,advmame2x
39
40frameskip=0
41snapdir=snaps
42aspect=true
43scaler=normal2x
44
45[cpu]
46# core -- CPU Core used in emulation: normal,full,dynamic.
47# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
48#           Setting this higher than your machine can handle is bad!
49# cycleup   -- Amount of cycles to increase/decrease with keycombo.
50# cycledown    Setting it lower than 100 will be a percentage.
51
52core=full
53cycles=1500
54cycleup=500
55cycledown=20
56
57[mixer]
58# nosound -- Enable silent mode, sound is still emulated though.
59# rate -- Mixer sample rate, setting any devices higher than this will
60#         probably lower their sound quality.

…Show last 98 lines

61# blocksize -- Mixer block size, larger blocks might help sound stuttering
62#              but sound will also be more lagged.
63# wavedir -- Directory where saved sound output goes when you use the
64#            sound record key-combination, check README file.
65
66nosound=false
67rate=22050
68blocksize=2048
69wavedir=waves
70
71[midi]
72# mpu401 -- Enable MPU-401 Emulation.
73# device -- Device that will receive the MIDI data from MPU-401.
74#           This can be default,alsa,oss,win32,coreaudio,none.
75# config -- Special configuration options for the device.
76
77mpu401=true
78device=default
79config=
80
81[sblaster]
82# sblaster -- Enable the soundblaster emulation.
83# base,irq,dma -- The IO/IRQ/DMA address of the soundblaster.
84# sbrate -- Sample rate of soundblaster emulation.
85# adlib -- Enable the adlib emulation.
86# adlibrate -- Sample rate of adlib emulation.
87# cms -- Enable the Creative Music System/Gameblaster emulation.
88#        Enabling both the adlib and cms might give conflicts!
89# cmsrate -- Sample rate of cms emulation.
90
91sblaster=true
92base=220
93irq=7
94dma=1
95sbrate=22050
96adlib=true
97adlibrate=22050
98adlibmode=adlib
99cms=false
100cmsrate=22050
101
102[gus]
103# gus -- Enable the Gravis Ultrasound emulation.
104# base,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the 
105#            Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
106# rate -- Sample rate of Ultrasound emulation.
107# ultradir -- Path to Ultrasound directory.  In this directory
108#             there should be a MIDI directory that contains
109#             the patch files for GUS playback.  Patch sets used
110#             with Timidity should work fine.
111
112gus=false
113rate=22050
114base=240
115irq1=5
116irq2=5
117dma1=3
118dma2=3
119ultradir=C:\ULTRASND
120
121[speaker]
122# pcspeaker -- Enable PC-Speaker emulation.
123# pcrate -- Sample rate of the PC-Speaker sound generation.
124# tandy -- Enable Tandy 3-Voice emulation.
125# tandyrate -- Sample rate of the Tandy 3-Voice generation.
126# disney -- Enable Disney Sound Source emulation.
127
128pcspeaker=true
129pcrate=22050
130tandy=true
131tandyrate=22050
132disney=true
133
134[bios]
135# Nothing to setup yet!
136
137
138[dos]
139# xms -- Enable XMS support.
140# ems -- Enable EMS support.
141
142xms=true
143ems=true
144
145[modem]
146# modem -- Enable virtual modem emulation.
147# comport -- COM Port modem is connected to.
148# listenport -- TCP Port the momdem listens on for incoming connections.
149
150modem=true
151comport=2
152listenport=23
153
154[autoexec]
155# Lines in this section will be run at startup.
156
157