VOGONS

Search

Common searches

486 hard drive on dos 7

Topic actions

First post, by andy120

Posted on 
User metadata
Rank Newbie
Rank
Newbie

im having trouble getting a 486 to use 32 bit partition. it sees the cf card as 2 gig correctly and fdisk can only see 512mb. 32 bit is enabled in the bios. with 98 or dos 7 installed it will not read the hdd and either system halts or no os errors. 6.22 fdisk only seems to have fat16. i cannot use a floppy and have been loading from another pc on dos 7/w98. i have a isa i/o card but i do not know how to enable the floppy port without getting an error from the (missing) onboard fdc. options?

Powered by one Harris 286-12

Reply 2 of 3, by andy120

Posted on 
User metadata
Rank Newbie
Rank
Newbie

So, i have got LBA to work on a D drive (fat32) but if i put that drive in C it will give me no rom, system halted. LBA is enabled. could there be something that it can only boot to a fat16? there is no specific 13h.

Powered by one Harris 286-12

Reply 3 of 3, by waterbeesje

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Did you recreate partitions and format the cf under DOS? Also you could try the "fdisk /mbr" switch to (re)construct the master boot record.

Most cf are not directly suitable for bootable DOS partitions, so they have to be set up right.

Stuck at 10MHz...

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window