First post, by Scythifuge
- Rank
- Oldbie
Greetings!
As I wait for new cooling options to arrive and while I work on finalizing my parts configuration and setting up the system, I am looking for information on how to OC this set up. The CPU is a modded K6-2+ to be a K6-III+. The motherboard has dip switches (a first, for me unless the K6-2 350 I built back in 2000 had them and I simply do not recall.) The seller of the CPU said that depending on the system, this modded CPU can get up to 600-633Mhz.
I have a Voodoo5, 128mb RAM, a Voodoo2, an AWE32 (for DOS/WfW 3.11,) an Audigy 2 ZS (for Windows 9x,) an MPU-IPC-T, and some NIC that works in all the OS I will be using and has an eeprom slot for future experimentation with XTIDE, two optical drives, 3.5 and 5.25 floppy drives, and a dual-CF/IDE drive. I went with a k6+ for slowing it down when using it for MS-DOS and WfW 3.11, but I am hoping to squeeze as much power as I can for Windows 9x usage, especially with the overkill that is the Voodoo5, hehehe.
I am seeking help/advice or sites/documentation for knowledge concerning trying to run this at 600-633Mhz. Other than accidentally running my Pentium 90 at 100Mhz back in the day, I have never played around with overclocking.
Many thanks!
Scythifuge