First post, by Sucho
- Rank
- Newbie
Hi all, I was trying to figure out pinout for PS/2 header on GA-586HX REV1.56 other day, and while measuring voltage on pins, the probe slipped. Cannot be sure what got shorted but probably pins of PS/2 header.
There was a spark, PSU restarted, PC booted as usual.
Since then I have managed to find pinout (http://jope.fi/pinouts/ga586hx_ps2.txt) from back side of case apparently it goes VCC, GND, DATA, CLK
Now I measure like 0.06V on what seems to be CLK pin on PS/2 header.
What have I damaged? How would one go around fixing it?
Best regards,
Peter
i486dx2-50(@66), Tseng ET4000AX