First post, by Retromangia
Hey guys,
So today i received a nice Asus P2B-F board with a w/ P3-500hz chip. I wasn't getting a picture using an AGP card at first, so i plugged in a Matrox G400 PCI card, and she came to life!
I had it posting, and was able to set options within the BIOS. I reset everything to factory defaults, rebooted, and went back into the BIOS. I didn't make any other changes, exited the BIOS... Then NOTHING 😢
Now all of a sudden, I'm no longer getting a picture again. The fan's come on, the lights flash on the Keyboard (PS/2), but no signal.
I've tried everything!
- took out CMOS battery/replaced with new one.
- tried different sticks of RAM, in ALL Slots
- tried 6 other different AGP video cards
- Tried the 1 PCI video card in all 5 PCI Slots
- Took the board out of the case and it's now running on the table.
- tried different VGA Cable/ & different Monitor.
- Unplugged/re-plugged dozens of times.
Nadda. What the heck is going on here? Honestly stumped. I spent a good 2 hours trying to troubleshoot. Really need a bang my head against the wall emogi.
Any advice would be much appreciated!
Thanks,
Retro