ITK-302 RAM/ROM disk \ VOGONS

ITK-302 RAM/ROM disk

Topic actions

First post, by PvvS

Posted on 2017-05-30, 18:22

PvvS Offline

Rank Newbie

Rank: Newbie
Posts: 4
Joined: 2017-05-30, 18:18

Hello, I bought one XT card, among other things. Finally it is ITK-302 RAM / ROm disk ... Unfortunately somebody probably pulled 2 EPROMs. In others, according to the contents of the IBM DOS 3.3, but also with MS RAMDISK and possibly IPX Netware support .. How do I know stuff there. Did not anyone come across at least the manual or the ROM?

Reply 1 of 2, by matze79

Posted on 2017-06-02, 10:17

matze79 Offline

Rank l33t

Rank: l33t
Posts: 2947
Joined: 2014-12-12, 14:25
Location: Germany, Frankonia

Simply Place ROM's with your OS on the Card ?

i don't think there is something removed.
You may simply need to burn new rom's.

i would remove this accumulator before it is leaking and destroys your card.

https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board

Reply 2 of 2, by PvvS

Posted on 2017-06-10, 08:50

PvvS Offline

Rank Newbie

Rank: Newbie
Posts: 4
Joined: 2017-05-30, 18:18

Thanks for the reply. But there is more memory in the card, and there is a RAM disk on the card. I would like to make it fully operational. By burning content to EPROM, the problem is not just about preparing data for the disk. Meanwhile, I just find out which jumper settings are set up from A to D.
The battery has long been removed, a new one is in place, but I will put it in the functional card.

Go to top of page Go to top of page

Back to General Old Hardware