The two pictures above are different from mine, I hyperlinked those two from another site. My SB, IRQ, and DMA is grayed out, so I cannot edit it, and sound test for Sound Blaster 8bit Sound is also greyed out. It says here in readme,
3. Depending on the environment in which the DS-XG is used, all Sound Blaster items may be grayed out and
cannot be modified. This indicates that Sound Blaster cannot be used on your PC.
4. Depending on the environment in which the DS-XG is used, INTA# IRQ may be grayed out and not
modifiable even if you set the IRQ MODE to INTA#.
This is because the same INTA# IRQ is shared by the DS-XG and by devices other than the DS-XG.
Please move the DS-XG to a different slot, and execute SETUPDS.EXE once again.
(You must turn off the power before removing or inserting the DS-XG in a slot.)
5. Depending on the environment in which the DS-XG is used, the DMA MODE may be grayed out and
cannot be modified.
This indicates that the DS-XG supports only that particular DMA MODE.
Do I have to position the sound card in a different slot since it has three PCI slots. I put it in far right.