First post, by senrew
- Rank
- Oldbie
I have a P2B-S that seems to have issues with 1.5v keyed AGP cards. I've tried several cards with 3.3v only, and dual 3.3v and 1.5v keys and cards with the dual keying will cause error beeps on boot. The cards with only 3.3v keys boot just fine.
I've read that this family of boards should run the cards fine at the higher voltage, but I'm not sure what to do here.
The board has the latest bios from the asus site, but is an older revision (1.02).
Any ideas?
Halcyon: PC Chips M525, P100, 64MB, Millenium 1, Voodoo1, AWE64, DVD, Win95B