First post, by ramunegaming
Hi guys, I was cleaning up my config.sys and autoexec.bat files via dos as I had so much unless stuff in there eating up ram and I was having issues getting KQ6CD to run. However, I must have removed something important by accident as when I boot up my pc now I get a message saying "ERRO12: AWE32 initialization failed" I can't seem to work out what happened I think it might be a I/O conflict as when I load up diagnose now I get an error message saying I/O error. I also have an issue with softmpu.exe now as it's coming up with "bad command or file name" on boot. These are the only 2 errors I have atm.
Sound Card: SB AWE64 value + Roland MT-32
Config.sys
DEVICE=C:\windows\command\dblspace.sys /move
DEVICE=C:\windows\himem.sys
DEVICE=C:\windows\emm386.exe RAM
DEVICEHIGH=C:\drivers\cd-rom\sjcdapi.sys /D:MSCD000
Files=30
buffers=30
dos=high,umb
stacks=9,256
AutoExec.bat:
SET SOUND=C:\SB16
SET BLASTER=A220 I5 D1 H5 P330 T6
SET MIDI=SYNTH:1 MAP:E MODE:0
SET CTCM=C:\CTCM
C:\SB16\DIAGNOSE /S
C:\SB16\AWEUTIL/S
C:SB16\MIXERSET.EXE /P /Q
SOFTMPU.EXE /SB:220 /IRQ:5 /MPU:330
LH C:\DRIVERS\CUTEMO~1\CTMOUSE.EXE
LH C:\windows\command\mscdex /d:mscd000 /l:d
Any help would be appreciated.