First post, by raindog1975
I am trying to set the CPU frequency for a K6-2 400 on a Matsonic MS6260 according to the manual by setting the CPU FSB to 100 MHz and and the multiplier to 4x but I get ( according to Sysosft Sandra ) CPU FSB 84 MHz and PCI 42 MHz ( and a pretty unstable system as a result ) . I checked and triple checked the jumper configuration ( including what's printed on the motherboard itself ) and I can't get 100 MHz CPU FSB . I settled for now at FSB 66 with a 5.5x multiplier( the maximum the board allows ) = 363 MHz for the CPU and the PCI is at 33 MHz ( and the system seem very stable ). Any ideas what's wrong ?
Pentium MMX 166 Acorp 5VIA3P 32 MB EDO-Ram Matrox Millennium 4 MB -Win 95 OSR 2
AMD K6-2 400 Matsonic MS6260S 128 MB SDRAM PC 100 TNT2 M64 32 MB - Win 98 SE
AMD Athlon 1GHz Soltek SL-75 KAV 256 MB SDRAM PC 133 Geforce 6800 GT / FX 5500 - work in progress