ASUS ASIC demaged chip in P3B-F \ VOGONS

ASUS ASIC demaged chip in P3B-F

Topic actions

First post, by MKT_Gundam

Posted on 2019-04-27, 13:40

MKT_Gundam Offline

Rank Member

Rank: Member
Posts: 354
Joined: 2017-11-01, 00:52

I rescued the P3bf mobo from recycler center. The mobo looks good condition but the ASUS ASIC chip is demaged. In the manual only says something like a hardware monitor. So no luck?

Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.

Reply 1 of 5, by rasz_pl

Posted on 2019-04-27, 14:20

rasz_pl Offline

Rank l33t

Rank: l33t
Posts: 4208
Joined: 2017-06-04, 00:57

damaged how?

https://github.com/raszpl/FIC-486-GAC-2-Cache-Module for AT&T Globalyst
https://github.com/raszpl/386RC-16 memory board
https://github.com/raszpl/440BX Reference Design adapted to Kicad
https://github.com/raszpl/Zenith_ZBIOS MFM-300 Monitor

Reply 2 of 5, by MKT_Gundam

Posted on 2019-04-27, 15:51

MKT_Gundam Offline

Rank Member

Rank: Member
Posts: 354
Joined: 2017-11-01, 00:52

rasz_pl wrote:
damaged how?

Here:

Last edited by MKT_Gundam on 2019-04-27, 15:57. Edited 1 time in total.

Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.

Reply 3 of 5, by luckybob

Posted on 2019-04-27, 15:54

luckybob Offline

Rank l33t++

Rank: l33t++
Posts: 5103
Joined: 2009-04-30, 04:43

use a hobby knife to gently straighten those pins.

Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them. - Reverend Mother Gaius Helen Mohiam

Reply 4 of 5, by rasz_pl

Posted on 2019-04-27, 16:03

rasz_pl Offline

Rank l33t

Rank: l33t
Posts: 4208
Joined: 2017-06-04, 00:57

salvageable, get a razor and try VERY carefully bending pins apart, they dont have to be super straight, just not shorting
even if you rip some pins by accident its not game over, you can dremel out outer plastic to get to the lead frame

https://imgur.com/r/electronics/Vcf7ipV
http://hackedgadgets.com/2015/08/25/repair-br … 2-laser-cutter/

Reply 5 of 5, by Ozzuneoj

Posted on 2019-04-27, 22:15

Ozzuneoj Offline

Rank l33t

Rank: l33t
Posts: 3762
Joined: 2016-03-16, 21:33
Location: USA

rasz_pl wrote:
salvageable, get a razor and try VERY carefully bending pins apart, they dont have to be super straight, just not shorting even […]
Show full quote
salvageable, get a razor and try VERY carefully bending pins apart, they dont have to be super straight, just not shorting
even if you rip some pins by accident its not game over, you can dremel out outer plastic to get to the lead frame

https://imgur.com/r/electronics/Vcf7ipV
http://hackedgadgets.com/2015/08/25/repair-br … 2-laser-cutter/

Wow... somehow I never realized that's what was going on inside a plastic chip package. I do pin repairs from time to time (some not so successful), so thank you for that! 😀

Now for some blitting from the back buffer.

Go to top of page Go to top of page

Back to General Old Hardware