First post, by jheronimus
- Rank
- Oldbie
Hi, all!
Recently I've got myself an Intel PRO/100 network card:
and I'm trying to get it to work under DOS 6.22 so that I could mess with mTCP and ethflop.
I've found a copy of Crynwr.com driver (e100b11b.zip), but when I try to start it (e.g. e100bpkt 0x60), the whole system freezes after a "Chip self-test PASSED" and I need to reboot the system.
Note that the card is working perfectly under Windows 3.11 WFG with stock Intel drivers v24.2 and Microsoft's TCP/IP stack.
My specs are:
Intel Pentium 133 + 32MB RAM;
Intel Advanced/ATX motherboard with 430FX chipset;
Onboard S3 Trio64V+;
Onboard Crystal 4232 soundcard, set to IRQ5, DMA 1,5 and MPU disabled;
Keropi's MusicQuest clone card, set to IRQ2 and 330h.
All COM and LPT ports disabled as well as secondary IDE controller to ensure there are no IRQ conflicts. According to MSD the NIC uses IRQ10.