First post, by Panties
- Rank
- Member
Hi,
I'm gonna get myself an P3/Celeron Slot1 Board.
I'm building myself a retro computer.
My concern now is the casing. I do not want too big nor too small, preferbaly Tower.
Here are my few research:-
https://www.aliexpress.com/item/32888968498.h … rchweb201603_52
https://www.aliexpress.com/item/33054101611.h … rchweb201603_52
https://www.aliexpress.com/item/32966644442.h … rchweb201603_52
https://www.aliexpress.com/item/32894454214.h … 4d-7da552b5ac93
These casing seems nice, open concept, and will collect dust eventually.
Can you guys help me to make the right pick please? Is there a better option? I wanted smaller, able to stack/hold multiple Motherbaords (say 3-5 motherboards) at the same time.
I was thinking of having 2-5 of..-
https://www.aliexpress.com/item/32889926836.h … 61-4fb8ec819c7f
Bare-Metal, and use wood to build up a custom casing,.. that could hold multiple boards. Something like a rasberry pi, like this:-
https://www.amazon.com/Raspberry-Pi-Complete- … e/dp/B01LVUVVOQ
But this isn't raspberry, this is 3-5 ATX motherboard, stacking up together..... Where can I find such case? or Test bench stacking up? Any thoughts? 😕 😕 😕 😕
P/s: I try googling a lot for this, and to avail....any advice/help?