First post, by jasa1063
- Rank
- Oldbie
I just got a Chicony 386/40 CH-386-33A/40A motherboard for a new system build. The motherboard was upgraded with CR2032 coin cell battery holder. The CMOS settings are retained, but when powered off the computer the date and time will not update. I replaced the CR2032 with a known working battery. I had a similar problem with my 386SX/40 build and it was corrected by placing a jumper on the middle two pins on the external battery connector on the motherboard. I tried that here, but with no luck. I am including a picture of the board and a close up of the are with the battery. Jumper J10 is for an External Battery.