Reply 220 of 334, by Artex
- Rank
- l33t
My Retro B:\ytes YouTube Channel & Retro Collection
My Retro B:\ytes YouTube Channel & Retro Collection
Aww they look awesome 😀 Well done!
Thanks man! Not too shabby for a lower-than-novice Photoshop guy.
My Retro B:\ytes YouTube Channel & Retro Collection
I must say, although they aren't for me, there is something about having a few ready-to-go 486 PCs at home 😀
That is awesome! Feel like posting your templates?
Plan your life wisely, you'll be dead before you know it.
wrote:That is awesome! Feel like posting your templates?
Sure - here's a zip of them. A few variations on the Cyrix 5x86, the AMD Am5x86 and a Intel DX4 badge. These were a (VERY) rough, quick mockup in Photoshop and they were somewhat pixelated at the original size. However, when shrunk to 25mm x 25mm, it's not as evident.
My Retro B:\ytes YouTube Channel & Retro Collection
Thanks guys for the last couple of pages lots of good info!
So its safe to assume the AM5X86@160 edges the Cyrix 5x86@120 for gaming? I found it suprising that the AMD scored higher than the Cyrix in Quake I would think its also safe to assume the AMD would score better for most games in that case.
Those case badges look good. What did you print them with?
But 486's without FDDs? 😲 😕
wrote:So its safe to assume the AM5X86@160 edges the Cyrix 5x86@120 for gaming? I found it suprising that the AMD scored higher than the Cyrix in Quake I would think its also safe to assume the AMD would score better for most games in that case.
With both run on the Biostar board, X5-160 15.1 fps in Quake (but noted not stable). Cyrix 5x86-120 14.8 fps in Quake (but stable?)
Artex, perhaps you could run the Cyrix 5x86-120 in your VLB board to compare it with the X5-160?
Plan your life wisely, you'll be dead before you know it.
wrote:Artex, perhaps you could run the Cyrix 5x86-120 in your VLB board to compare it with the X5-160?
I can try this if I have time.
Now that these two builds are set up, I think I'm going to start adding sound cards, network cards, etc to get them 'more' set up. I also want to get that Saturn board up and running - I'd hate to have it sit there not being used. I'll probably throw my DX4 WB in there..
I need to track down another power supply as well - not sure I want to get a 'new' AT power supply or try to find an ATX with -5V and use a converter.
My Retro B:\ytes YouTube Channel & Retro Collection
What were your symptoms of instability with the X5-160 in the Biostar board?
Plan your life wisely, you'll be dead before you know it.
wrote:What were your symptoms of instability with the X5-160 in the Biostar board?
I was able to get it working (and stable) at 133Mhz and 160Mhz.
My Retro B:\ytes YouTube Channel & Retro Collection
Sorry, got lost in the posts. Do you have a high resolution image of the Saturn II board?
Plan your life wisely, you'll be dead before you know it.
wrote:Sorry, got lost in the posts. Do you have a high resolution image of the Saturn II board?
No worries! This thread has become quite massive. I'll grab a new picture for you tonight with a better camera.
EDIT: Picture attached
My Retro B:\ytes YouTube Channel & Retro Collection
MX8315 for generating the FSB. This chip will generate 20, 25, 33, 40, 50, 60, and 66 MHz FSBs from your 14.31818 MHz crystal. There are 3 inputs on the MX8315 which select the FSB. I suspect that if you solder in the missing jumper header, JP19, that you should have access to the full spectrum of FSBs.
Plan your life wisely, you'll be dead before you know it.
wrote:MX8315 for generating the FSB. This chip will generate 20, 25, 33, 40, 50, 60, and 66 MHz FSBs from your 14.31818 MHz crystal. There are 3 inputs on the MX8315 which select the FSB. I suspect that if you solder in the missing jumper header, JP19, that you should have access to the full spectrum of FSBs.
So... one of these puppies?
My Retro B:\ytes YouTube Channel & Retro Collection
That's right. And you can use one of these puppies to suck out the old solder.
Plan your life wisely, you'll be dead before you know it.
Cool - I have one of those already. I'll see if I can source that header and see what I can do.
My Retro B:\ytes YouTube Channel & Retro Collection
You could desolder that header from a dead motherboard. Even if you have a 4+ pin header, they are meant to snap to reduce in size.
Plan your life wisely, you'll be dead before you know it.
wrote:You could desolder that header from a dead motherboard. Even if you have a 4+ pin header, they are meant to snap to reduce in size.
Good idea. I'll see what I can find. I'm kind of a novice at soldering so it makes me a little nervous. I've really only de-soldered to remove barrel batteries.
My Retro B:\ytes YouTube Channel & Retro Collection