I have a 15" IBM CRT monitor from 1995 that needs work on the video port. It has a shit load of dust inside the monitor and it looks like the video port is affected. I can clean the port on the outside with contact cleaner, but it turns pink again after sitting there.
Discord: https://discord.gg/U5dJw7x
Systems from the Compaq Portable 1 to Ryzen 9 5950X
Twitch: https://twitch.tv/retropcuser
I also still own a 15" Sony Trinitron from 1994 and a huge 19" Samsung CRT. Had many more, but they had to go.
Now I have an NF3 Ultra-D, NF4 Ultra-D and NF4 SLI DR-Expert. Also finally got my second kit of those DDR500 OCZ's.
wrote:wrote:850GB, P4 1.4GHz (socket 423), 4x 256MB Rambus 800 Antec Phantom 500 […]
850GB, P4 1.4GHz (socket 423), 4x 256MB Rambus 800
Antec Phantom 500😎
And some 6core xeon and 12core opteron (25$ both, including shipping)
Loving the shag
HA, it's carpeting. I thought that was grass at first!
Halcyon: PC Chips M525, P100, 64MB, Millenium 1, Voodoo1, AWE64, DVD, Win95B
wrote:Now I have an NF3 Ultra-D, NF4 Ultra-D and NF4 SLI DR-Expert. Also finally got my second kit of those DDR500 OCZ's.
nice. looks like someone had long video card in it at one point too.
wrote:HA, it's carpeting. I thought that was grass at first!
I did too. It might not be the best idea to put computer parts on shag now that I think of it.
Sadly most of those DFI boards have the whiny but original chipset fan replaced by Zalman heatsinks which were a) extremely tall b) too wide. They work well on Intel boards where the chipset is above the graphics card but on DFI's they need some treatment with a saw.
Thankfully my DR-Expert still has the original fan and it's fully functional.
My NF3-UltraD also has a blue Zalman but it's not that bad since it's AGP, there aren't many 2-slot AGP cards anyway. FX5950 Ultra is the only one I know of being a full 2 slot design.
DFI's are difficult boards to work with, often the stock settings are all over the place. Especially RAM on DFI's needs a lot of tweaking, the stock timings are way too tight for most kits, I'm now trying to figure out how to run 4x1GB of those OCZ's at 400Mhz, stable.
Yeah both DFI and abit boards take a special type of person to use properly. Most get lost in the sea of bios settings.
wrote:And the TV I use daily is a 1978 zenith Space phone TV. Ok its a bit dodgy. It has a big warning on the back stating to ware a lead lined vest when working on it. 😲 And I did refurb it. It will need a new pitcher tube down the road. 😠 as its getting abit dim.
I keep an RCA TruFlat 27 inch CRT TV around for retro gaming and watching VHS/Classic TV shows.
Cyb3rst0rms Retro Hardware Warzone: https://discord.gg/jK8uvR4c
I used to own over 160 graphics card, I've since recovered from graphics card addiction
wrote:Yeah both DFI and abit boards take a special type of person to use properly. Most get lost in the sea of bios settings.
Doesn't that describe most old motherboards? Today everyone expects a Utility to do the work for them. Even boards as old as my P5N-D have an AI Overclocking tool.
Cyb3rst0rms Retro Hardware Warzone: https://discord.gg/jK8uvR4c
I used to own over 160 graphics card, I've since recovered from graphics card addiction
wrote:wrote:Yeah both DFI and abit boards take a special type of person to use properly. Most get lost in the sea of bios settings.
Doesn't that describe most old motherboards? Today everyone expects a Utility to do the work for them. Even boards as old as my P5N-D have an AI Overclocking tool.
Nothing like an old dfi board. True bios have gotten far more simple, but dfi was even crazy back in their day.
Mostly with all the ram settings.
I even seen a few with SATA port overclocking and other settings to overclock things you'd never think of overclocking.
http://i4memory.com/reviewimages/motherboards … 3RS_bios_18.jpg
https://www.overclock3d.net/gfx/articles/2008 … 1211701175l.jpg
http://www.pcstats.com/articleimages/200512/d … xpert_BIOS1.jpg
https://images.devshed.com/dh/stories/LanParty_Files/12.jpg
https://techgage.com/reviews/dfi/infinity_975 … 5x_29_thumb.jpg
https://images.devshed.com/dh/stories/LanParty_Files/12.jpg
http://www.lejabeach.com/DFI/790FXM2RS/bios/7 … M2RSBIOS-18.jpg
The main problem with DFI's is that they put such riddiculous timings to RAM, you could reset to BIOS defaults and still BSOD in Windows. That's what I get now, with 4x 1GB sticks the board thinks it can set the timings to something like 3-2-3-6. 😀))
Well my M912 Motherboard arrived.
It came with one Intel 486 DX2( it will be swapped with one DX4-100),512k of cache and with 8MB of 72 pin SIMM, but i got a pair of 8MB alongside to get 16MB(i think for ms-dos and dos games it will be more than enough).
After this month close i will get the VLB VGA(i think i will go with the Cirrus Logic that i mentioned in another topic) the VLB Multi I/O, the CF Card (2GB).
Since i don't own any CD-Audio game i will not bother with the CD-ROM right now.
And i also need to get one AT power supply and recap it.
I tested the fan that came with the dx2 and the bard and its quite silent and will be good to be used on the dx4 100
wrote:Well my M912 Motherboard arrived. https://i.imgur.com/jBHFGGRm.jpg It came with one Intel 486 DX2( it will be swapped with one D […]
Well my M912 Motherboard arrived.
It came with one Intel 486 DX2( it will be swapped with one DX4-100),512k of cache and with 8MB of 72 pin SIMM, but i got a pair of 8MB alongside to get 16MB(i think for ms-dos and dos games it will be more than enough).
After this month close i will get the VLB VGA(i think i will go with the Cirrus Logic that i mentioned in another topic) the VLB Multi I/O, the CF Card (2GB).
Since i don't own any CD-Audio game i will not bother with the CD-ROM right now.
And i also need to get one AT power supply and recap it.
I tested the fan that came with the dx2 and the bard and its quite silent and will be good to be used on the dx4 100
I had that board from 1994-2012 and it was a great board. The board died of BIOS failure, it had an AM486 DX4-120 in it, 24MB RAM, S3 Paradise Bahams 64 VLB, WinBond Multi I/O ISA, Sound Blaster 16 Wave Effects CT4170
Discord: https://discord.gg/U5dJw7x
Systems from the Compaq Portable 1 to Ryzen 9 5950X
Twitch: https://twitch.tv/retropcuser
wrote:wrote:Well my M912 Motherboard arrived. https://i.imgur.com/jBHFGGRm.jpg It came with one Intel 486 DX2( it will be swapped with one D […]
Well my M912 Motherboard arrived.
It came with one Intel 486 DX2( it will be swapped with one DX4-100),512k of cache and with 8MB of 72 pin SIMM, but i got a pair of 8MB alongside to get 16MB(i think for ms-dos and dos games it will be more than enough).
After this month close i will get the VLB VGA(i think i will go with the Cirrus Logic that i mentioned in another topic) the VLB Multi I/O, the CF Card (2GB).
Since i don't own any CD-Audio game i will not bother with the CD-ROM right now.
And i also need to get one AT power supply and recap it.
I tested the fan that came with the dx2 and the bard and its quite silent and will be good to be used on the dx4 100I had that board from 1994-2012 and it was a great board. The board died of BIOS failure, it had an AM486 DX4-120 in it, 24MB RAM, S3 Paradise Bahams 64 VLB, WinBond Multi I/O ISA, Sound Blaster 16 Wave Effects CT4170
What caught my attention on this board is the CR2032 instead of those dallas rtc bs and those soldered battery, also the zif socket, i really hate those sockets where you need to push hard the cpu on the socket
All, and more for $150 - just had to send my son to Oklahoma to pick it up. 🤣 - He and his wife enjoyed the road trip! And I, got the spoils!
Intel P3 800Mhz
Soyo SY-6BA+II
3, 128meg SDRAM 168pin DIMM PC133
ATI Rage Pro AGP 16MB
Quantum3D Obsidian x24 SLI PCI (3Dfx Voodoo 2)
Creative Lab's SoundBlaster ISA AWE 64 Gold
TSST TS-H653A Sata 16x DVD+-RW Burner (PATA/SATA 863b Adapter)
Realtek RTL8139 NIC
Microsoft Sidewinder GamePad
Microsoft Sidewinder 3D Pro Joystick
Microsoft Sidewinder Freestyle Pro
Western Digital Caviar 20GB
Seagate Barracuda 20GB
50+ games - period specific mid to late nineties, all original media
-- Regards, Joe
Expect out of life, that which you put into it.
wrote:wrote:Well my M912 Motherboard arrived. https://i.imgur.com/jBHFGGRm.jpg It came with one Intel 486 DX2( it will be swapped with one D […]
Well my M912 Motherboard arrived.
It came with one Intel 486 DX2( it will be swapped with one DX4-100),512k of cache and with 8MB of 72 pin SIMM, but i got a pair of 8MB alongside to get 16MB(i think for ms-dos and dos games it will be more than enough).
After this month close i will get the VLB VGA(i think i will go with the Cirrus Logic that i mentioned in another topic) the VLB Multi I/O, the CF Card (2GB).
Since i don't own any CD-Audio game i will not bother with the CD-ROM right now.
And i also need to get one AT power supply and recap it.
I tested the fan that came with the dx2 and the bard and its quite silent and will be good to be used on the dx4 100I had that board from 1994-2012 and it was a great board. The board died of BIOS failure, it had an AM486 DX4-120 in it, 24MB RAM, S3 Paradise Bahams 64 VLB, WinBond Multi I/O ISA, Sound Blaster 16 Wave Effects CT4170
Bios failure ? I've got the same board and it doesn't POST for no reason ... Could-it explain why ? I might try this as I encountered a dead bios chip once
Trying to identify old hardware ? Visit The retro web - Project's thread The Retro Web project - a stason.org/TH99 alternative
wrote:wrote:wrote:Well my M912 Motherboard arrived. https://i.imgur.com/jBHFGGRm.jpg It came with one Intel 486 DX2( it will be swapped with one D […]
Well my M912 Motherboard arrived.
It came with one Intel 486 DX2( it will be swapped with one DX4-100),512k of cache and with 8MB of 72 pin SIMM, but i got a pair of 8MB alongside to get 16MB(i think for ms-dos and dos games it will be more than enough).
After this month close i will get the VLB VGA(i think i will go with the Cirrus Logic that i mentioned in another topic) the VLB Multi I/O, the CF Card (2GB).
Since i don't own any CD-Audio game i will not bother with the CD-ROM right now.
And i also need to get one AT power supply and recap it.
I tested the fan that came with the dx2 and the bard and its quite silent and will be good to be used on the dx4 100I had that board from 1994-2012 and it was a great board. The board died of BIOS failure, it had an AM486 DX4-120 in it, 24MB RAM, S3 Paradise Bahams 64 VLB, WinBond Multi I/O ISA, Sound Blaster 16 Wave Effects CT4170
Bios failure ? I've got the same board and it doesn't POST for no reason ... Could-it explain why ? I might try this as I encountered a dead bios chip once
Yeah. The PC was sitting in storage since the late 1990s and didn't get taken out of storage until late 2011 when I discovered it. That and the original clock battery leaked and when I put the new one in, the settings erased itself and the date and time was always off (Award Lawsuit BIOS).
I have a Packard Bell Pack-Mate 28 Plus that still works to this day and it only needed a new clock battery.
Discord: https://discord.gg/U5dJw7x
Systems from the Compaq Portable 1 to Ryzen 9 5950X
Twitch: https://twitch.tv/retropcuser
My actually reading progress.
wrote:All, and more for $150 - just had to send my son to Oklahoma to pick it up. 🤣 - He and his wife enjoyed the road trip! And I, got the spoils!
Intel P3 800Mhz
This guy tossed 150 bucks and sent his son to an expedition for a P3 800?
wrote:Soyo SY-6BA+II
Nothing
wrote:3, 128meg SDRAM 168pin DIMM PC133
Still nothing
wrote:ATI Rage Pro AGP 16MB
Meh.
wrote:Quantum3D Obsidian x24 SLI PCI (3Dfx Voodoo 2)
Holy F........ F.......... F.................. beep beep beep ---------------
Couldn't finish the rest.
Found a few new keyboards.
wrote:All, and more for $150 - just had to send my son to Oklahoma to pick it up. lol - He and his wife enjoyed the road trip! And I, […]
All, and more for $150 - just had to send my son to Oklahoma to pick it up. 🤣 - He and his wife enjoyed the road trip! And I, got the spoils!
Intel P3 800Mhz
Soyo SY-6BA+II
3, 128meg SDRAM 168pin DIMM PC133
ATI Rage Pro AGP 16MB
Quantum3D Obsidian x24 SLI PCI (3Dfx Voodoo 2)
Creative Lab's SoundBlaster ISA AWE 64 Gold
TSST TS-H653A Sata 16x DVD+-RW Burner (PATA/SATA 863b Adapter)
Realtek RTL8139 NIC
Microsoft Sidewinder GamePad
Microsoft Sidewinder 3D Pro Joystick
Microsoft Sidewinder Freestyle Pro
Western Digital Caviar 20GB
Seagate Barracuda 20GB
50+ games - period specific mid to late nineties, all original media
Really glad that somebody picked up that system! I would have hated to see the guy give up trying to sell it and send it to the trash/recycler/whatever.
