VOGONS

Search

Common searches

needed: Audigy 2 drivers for windows 98SE

Topic actions

First post, by RogueTrip2012

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Hi again. So I recapped an old MSI MS-6309 today and got windows98se installed on it.

Everything is fine except that I cannot find drivers for the Audigy 2 SB0240 that install everything. I did find a set of WDM that will atleast install the audio processor and the 1394 firewire driver.....but not a "PCI Input Controller" I assume it might be the SB16 Emulation?

Sound will work with these WDMs I found.

Are there any of Daniel K packs that work with the Audigy 2 and windows98se? or Soft-modded drivers?

Here is the system build:
Pentium III 733MHz
MSI MS-6309
256MB PC-133
Voodoo 5 5500AGP
DFI 10/100 nic card
Soundblaster Audigy 2 SB0240
40GB Samsung HDD
Samsung 52x CDRW 8mb buffer

TIA!

Reply 1 of 2, by RogueTrip2012

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Just an update. I got the those WDM drivers to install, the hitch.... I installed Windows ME!

Turns out that the item missing is a Creative Game Port.

I have never used Windows ME on my own computers so this will be fun. Installation of every thing went well until my NIC card. Using a DFE-530TX+ driver cd kept installing XP drivers for some reason. Once I manually installed the ME drivers it looked good in the device manager, but still no internet!!! After messing with the drivers a bit more I found that the TCP/IP protocol did not install for the D-Link! Once I got that installed internet finally was working.

Just getting ME2Dos installed and removing PCHealth, System Restore. Will see how things go.

> W98SE . P3 1.4S . 512MB . Q.FX3K . SB Live! . 64GB SSD
>WXP/W8.1 . AMD 960T . 8GB . GTX285 . SB X-Fi . 128GB SSD
> Win XI . i7 12700k . 32GB . GTX1070TI . 512GB NVME

Reply 2 of 2, by RogueTrip2012

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Maybe my last update. Got bored of Windows ME already and just got done installing windows98se once more.

Upon further inspection I found that the ctljystk.inf was not calling the proper id string of the audigy card. Once I added the proper string the driver installed no with problems. I haven't tested a joystick yet but do have one on the way and might check it if it works. Atleast Device Manager will stop showing a stupid Exclamation point 😁

> W98SE . P3 1.4S . 512MB . Q.FX3K . SB Live! . 64GB SSD
>WXP/W8.1 . AMD 960T . 8GB . GTX285 . SB X-Fi . 128GB SSD
> Win XI . i7 12700k . 32GB . GTX1070TI . 512GB NVME

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window