Adtron SCSI to CF Adapter anyone knows? \ VOGONS

Adtron SCSI to CF Adapter anyone knows?

Topic actions

Post a reply

First post, by Callahan

Posted on 2016-01-04, 09:01

Callahan Offline

Rank Member

Rank: Member
Posts: 104
Joined: 2014-04-10, 15:59
Location: Kielce Poland Polska

Recently i bought for a 1$ this adapter, industrial/army/space class flash hard disk scsi II with 50 pin port:
Manufactured by Adtron for RobotDoctor.
Adtron site says that it supports up to 64GB but robotdoctor site says it supports only 1GB max.
Device has 4 CF slots... all working. Seems to be working. My question is why it sees only 62MB when I use 8GB compact flash? I tested it with adaptec U160 card using 50Pin port and 68 wide port +adapter...All reports same capacity: 62MB.
I do not have any card with lower capacity
It is possible that robotdoctor has flashed own FW?

Has anyone seen such a device or had to deal with it?

Cpq: ap550(2x1G/256k), sp750(2x900/2MB), 4100@PODP5V83, 5100(2xpII300),w8000(2x2.8).
HP Vectra XU 6/200 2x PIIOD 512MB FPM
Super S2DG2@550/1MB SCSI 15k V5 5500
P4T533-C P4 3,06 Ti4600
V3 3500 AMD k6-III+ GA-5AX
PR440FX-2x PIIOD Voodoo 4500 PCI r320 CT1920

Reply 1 of 5, by brostenen

Posted on 2016-01-04, 09:28

brostenen Offline

Rank l33t++

Rank: l33t++
Posts: 6334
Joined: 2014-05-07, 21:13
Location: Northern Jutland, Denmark.

Never seen one of these before. Personally I love this kind of shit, and would love to have something like this, just to play around with.
Normally I use a regulair HDD for IDE, though SCSI is a bit different, so CF cards seem to be a better choice when it comes to heat.
A shame you only have a CF edition and not one of those IDE to SCSI converters. 🙁

Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick....

My blog: http://to9xct.blogspot.dk
My YouTube: https://www.youtube.com/user/brostenen

001100 010010 011110 100001 101101 110011

Reply 2 of 5, by NJRoadfan

Posted on 2016-01-04, 16:47

NJRoadfan Offline

Rank Oldbie

Rank: Oldbie
Posts: 979
Joined: 2012-05-26, 03:54
Location: Northern NJ

I have the CF25 (2.5" SCSI) version of this adapter (direct from Adtron no custom firmware), no problems using larger CF cards. Its entirely possible that the adapter you have has a custom ROM on it that limits the size of the CF card. Many custom/industrial applications required specific drive sizes in order to work.

Confirmed, the model number indicates the "size" of the drive: S35F-64CGH1

There are reports of size-limited Adtron drives out there.

Reply 3 of 5, by Callahan

Posted on 2016-01-05, 17:41

Callahan Offline

Rank Member

Rank: Member
Posts: 104
Joined: 2014-04-10, 15:59
Location: Kielce Poland Polska

Thanks NJRoadfan!
What do You think, is it possible to re-flash my disk?
Where to get original fw? Disk has rs232 port i see...
Adtron for sure made fw updates, so way to update fw must be?

Reply 4 of 5, by matze79

Posted on 2016-01-05, 17:49

matze79 Offline

Rank l33t

Rank: l33t
Posts: 2570
Joined: 2014-12-12, 14:25
Location: Germany, Frankonia

Hey this thing has a 80186 CPU 😀

Nice Adapter i wish i had one.

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Co2 - for a endless Summer

Reply 5 of 5, by Callahan

Posted on 2016-01-06, 13:25

Callahan Offline

Rank Member

Rank: Member
Posts: 104
Joined: 2014-04-10, 15:59
Location: Kielce Poland Polska

brostenen wrote:
Never seen one of these before. Personally I love this kind of shit, and would love to have something like this, just to play around with.
Normally I use a regulair HDD for IDE, though SCSI is a bit different, so CF cards seem to be a better choice when it comes to heat.
A shame you only have a CF edition and not one of those IDE to SCSI converters. 🙁

Aliexpresss offers scsi-to-ide for 30$...
http://www.aliexpress.com/item/Free-shipping1 … 1451318400_6150

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches