First post, by matze79
- Rank
- l33t
Hi,
i got problems running a V2 or V2 SLI inside my Xeon System.
Its my next Retro Project.
The Driver is installed fine but it cannot detect the Voodoo Card in Glide ?
The Device Manager shows it up as proberly installed and no conflict at all.
Running a glide app results into a error, because no card is found.
Glide demos do not run.
Mainboard is a Aopen Fortress 5000 (DGX2) with 2x Tanner Xeon with 2Megs of Cache, 550Mhz.
Also installed is a Geforce 3Ti and a Ensoniq Audio PCI (Creative SB128)
Mainboard: http://www.motherboard.cz/mb/aopen/dx2g-plus.htm
I also tried single card, dual cards, other Primary Cards, running without Soundcard.
Reinstall Driver, cleanup driver (removed everything 3dfx releated), testet older Fastvoodoo Version's
i get ever the same issue.
I'm pretty sure it should run a guy on the voodooalert site runs the Same Mainboard with a 12Mb SLI.
XP or 2000 its same Problem..
I also tried already to change PnP Settings in BIOS, ESCD reset.
Nothing helped yet.
The 3Dfx Cards are both Diamond Monster 3D II's with 8megs.
I tested the SLI before under Windows 98 in a Gigabyte TX3 with a 400Mhz K6-2 CPU.
Anyone Knows what happens here ?
Thanks for Help! i really want to run my voodoos inside this Machine.
Matthias
https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board