Hello,
I get PC with motherboard:
http://www.motherboard.cz/mb/chaintech/CT-6OIV2.htm
I found drivers for Intel chiptest, but only for that. I`ve be glad if you can help me.
I have Celeron 800 inside with small radiator and small fan. Fan is mounted on radiator on 4 screws. Its very loud, it is safe to disseble it?
integrated graphics driver for i815:
https://downloadcenter.intel.com/product/8153 … hics-Controller
Sound driver:
For the sound driver please locate the sound chip i.e. Realtek, C-Media etc. on your board, write down the chip name and google "XYZ 1234 sound driver"
I founded ALC200 13083T1 115D chip, just need to google.
Memory size 512mb is for 2 sockets or each?
wrote:I founded ALC200 13083T1 115D chip, just need to google.
Memory size 512mb is for 2 sockets or each?
Realtek ALC201/201A?
That is an earlier Realtek AC97 codec, Realtek AC97 should work. Some mobos with front audio header must short 4 pins (pins 9-10 and 5-6 usually) with 2 jumpers to get audio working if you are not using the front audio header
Hello,
I tried to install audio drivers. I tried 2 versions, same result. They seems to install OK, but after reboot I can see eroor in devices manager:
Anyone know how to slove this?
I still didnt solve this problem. Anyone can link me drivers that should work with this card?
Did you try changing the resource conflicts manually if possible? Do you have access to a sound card. The Live! series cards are dirt cheap on ebay if you need something.
wrote:Hello, I get PC with motherboard: […]
Hello,
I get PC with motherboard:http://www.motherboard.cz/mb/chaintech/CT-6OIV2.htm
I found drivers for Intel chiptest, but only for that. I`ve be glad if you can help me.
I have Celeron 800 inside with small radiator and small fan. Fan is mounted on radiator on 4 screws. Its very loud, it is safe to disseble it?
Hi.
Celeron 800 will need a CPU fan, especially if the heatsink is kinda small as well (I've ran a Celeron 800 for quite a long time in 1 of my rigs).
Your motherboard will work with 512MB max memory. You could use PC-133 memory and set the CL to 2 instead of 3, it's just a couple extra clicks and will add to performance a little bit for virtually no risk or trouble whatsoever.
edit: This chipset might be able to run the memory asynchronously, but I don't know how this will affect performance, for older stuff I prefer to keep these synchronised and will adjust other settings (like the cas latency if using PC-133 @ 100MHz).
Since your board has AGP, why not install a cheap AGP card in there? GF2MX for instance would be a nice addition 😀.
Your board is actually quite good I think. Chaintech made decent board in that era at least and that Intel chipset has very few drawbacks.
