First post, by Jasin Natael
- Rank
- Oldbie
First post!
Please advise or move/remove if this is in the wrong area, or violates any rules.
First post but long time lurker here, learned tons from all of you so thanks in advance. My question is basically this; I recently purchased a Booster M5ALA ver 1.1 Super 7 board to be a basis for a k6-III build. The board was cheap enough and seemed to offer what I needed, AGP etc. However I can't seem to get it to POST, with any of my known working CPUS, RAM, etc. I'm not a newbie by any means to old hardware or building PC's in general, I've been doing it all my life.
But this seems to be a rather uncommon motherboard and all of the documentation that I've found had been for the later revisions. I have some concerns that possibly some of my voltage settings are wrong, or i'm overlooking something simple.
So before i relegate this board to the "rainy day" pile, I thought that I would ask some of you if you guys have any experience with this model.
Thanks again in advance.