First post, by fadedrobin
Rank
Newbie
I have a IBM PS/2 Model 80 and don't have the ESDI hdd for it. Am I boned or is there some way to hook up a cheap hard drive or usb drive to it?
Reply 1 of 4, by Unknown_K
Rank
Oldbie
Buy an MCA SCSI card.
Collector of old computers, hardware, and software
Reply 2 of 4, by eisapc
Rank
Member
- Rank
- Member
SCSI is the way to go. I would prefer an IBM controller due to enhanced compatibility, either the uncached (Tribble) or the cached one(Spock). ESDI drives are allmost unobtainable. Probably due to their high prices or due to the fact they were misstaken for defective MFM/RLL drives tue to their mechanical identical interface.
Reply 3 of 4, by SteveC
Rank
Member
My PS/2's ESDI hard drive is slowly failing so I've been on the lookout for a new drive too but so expensive!
YouTube: https://www.youtube.com/c/StevesTechShed
Twitter: https://twitter.com/SteveTechShed
Reply 4 of 4, by Unknown_K
Rank
Oldbie
What model number is the ESDI drive? I might have one.
Collector of old computers, hardware, and software