First post, by matze79
- Rank
- l33t
Hi,
i started to make a new VIA C3 Build, based on VIA EPIA 800.
This one Supports Sound in MS-DOS using the viafmtsr and viaudio.com TSR's.
It currently run's MS-DOS 5.0.
Its equipped with one Stick of 512Mb RAM, only 64Mb RAM currently used.
QEMM386 limits it 😀
Windows 3.11 is also running on this Machine.
I got a Pocket PSU but still missing a decent 12V Suppy 😀
The Frame is 3D Printed and still a Work in Progress.
Currently i found other Issues that need to be fixed first.
The Capacitors of this Brandnew NOS EPIA Board are all dry.
If i boot Linux or NetBSD and enable Xorg this will result into system instant off.
The GPU seems to run unstable, you can also see the Image slightly moving right/left.
My 3D Printed WIP:
https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board