I have been trying to find the jumper settings or a manual for a atc1000 socket 7 board
I found the atc1000+ manual but it is not the same on closer look, here is a picture of my board for reference if anybody can help
It's the file called 1000.zip
http://www.elhvb.com/mboards/a-trend/manuals/
But you need something that will open word 5.0 docs.
thanx I found that link before and struggling to open those files, not a 100% sure what is inside too, once I got tricked on files from elhvb like that and it was only the motherboard specs inside
Note that that motherboard is not (as equipped), a dual plane cpu board. It is single plane only unless you mod it. So, 3.3v(ish) cpus only. A pentium mmx overdrive 200 would be a fun cpu for this board or a k6-233 3.2v
Also, don’t just try any coast stick in there. The board supports a max of 512k
And there were several pinouts for coast sticks. The wrong one may fry that board/stick.
Max memory is 128mb 32x4 or 64x2
But max cachable is 64 mb so keep it at 32mb x2 or 16mb x4 unless you get a k6-3,k6-2+,k6-3+ In which case you can make it 128mb but for that you will need to mod voltage, possibly the bios.
