Voltage is set to 3.3V. For 5V, move all three jumpers of JP26 from 1-2 to 2-3.

All jumpers are described on the board, so why do you need the manual?

Thank you Sammler. This is my first time setting the jumpers like this, so I was unsure about it.

Think the reds also 5V for Intel DX2? But you wont damage anything when trying 3.3.
Also very low risk of damage when selecting wrong frequency for a short time...

I have the same:
search.php?keywords=PCCHIPS+CHIP+16+CHIP+18+9430-AS+9432-AS

As far as I remember it was running with the settings shown on the picture...

I've moved the red jumpers to 5V and it works. Thanks. Now I must find a nice heatsink.

Are there any other jumpers on the board I should be concerned about?

I dont know what do jumpers JP 6, JP7 and JP 8 mean? (see picture).

As I checked, this CPU has clock 2x, so I placed the jumper on JP 31 (2-3). I belive that is correct? (see picture)

Predator99 wrote:

Also very low risk of damage when selecting wrong frequency for a short time...

Please tell me which jumpers are for frequency?

Here is the doc you are looking for :

http://www.elhvb.com/mobokive/Archive/Oldman. … ips/jumpers.htm

It mentions the version w/ the black ISA slots, but the setting are the same on that model w/ white slots.

CuPid wrote:

Here is the doc you are looking for :

Thanks!