Need help identifying a capacitor \ VOGONS

Need help identifying a capacitor

Topic actions

Post a reply

First post, by bmwsvsu

Posted on 2019-11-22, 17:04

bmwsvsu Offline

Rank Member

Rank: Member
Posts: 106
Joined: 2018-04-08, 16:30

I have some motherboards with a bunch of faulty caps....and they're all the same culprit:

Evercon
125 degrees C
E67A

Now I'm not a capacitor expert. Nowhere printed is the capacitance rating. Google searching was mostly fruitless EXCEPT one lone forum post suggesting this might be a 1000uF 25v capacitor. Even so, most that I find on ebay with that capacitance rating are rated at 105 degrees C and this one is 125. What exactly should I be replacing this one with?

Reply 1 of 4, by ShovelKnight

Posted on 2019-11-22, 17:10

ShovelKnight Offline

Rank Oldbie

Rank: Oldbie
Posts: 588
Joined: 2019-04-04, 19:00

Are you sure there's no rating? Is it also absent on the other side of the cap?

Reply 2 of 4, by bmwsvsu

Posted on 2019-11-22, 17:35

bmwsvsu Offline

Rank Member

Rank: Member
Posts: 106
Joined: 2018-04-08, 16:30

Ok so now I feel like an idiot.....🤣 yes, its on the other side....6.3v 1500uf

Reply 3 of 4, by gdjacobs

Posted on 2019-11-25, 18:01

gdjacobs Offline

Rank l33t++

Rank: l33t++
Posts: 7629
Joined: 2015-11-03, 05:51
Location: The Great White North

These are the series codes for Evercon lytic caps.
http://www.paullinebarger.net/DS/Evercon/Ever … ies%20Table.pdf

All hail the Great Capacitor Brand Finder

Reply 4 of 4, by RoyBatty

Posted on 2019-11-26, 06:09

RoyBatty Offline

Rank Oldbie

Rank: Oldbie
Posts: 585
Joined: 2009-08-22, 11:37

Replace with panasonic or rubycon 1500uf @ 6.3v 105 C, probably it's 3.5mm lead spacing. Get the low ESR ones.

If you live in USA you can get them from mouser for around $10 for 15.

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches