First post, by Randomnesses
I have a Tandy CM-11 monitor that I picked up at a garage sale 15 years ago, and it's missing the control cover door. I'm finally getting around to trying to restore the Monitor and Computer I have to the best I can, and my hope is to try to create a replacement and 3D Print it, I've tried to make one just by looking at pictures online and measuring the opening and lots of trial and error, but I cannot find a good picture of the inside of the door cover anywhere. The closest I can find is this:
https://i.ebayimg.com/images/g/jdkAAOSwythewDBC/s-l1600.jpg
But it's just one angle of it, It would be nice if I could get a couple different angles of it, like side views of the pieces that clip on on both sides and any other nice angles that would help in designing it. If anyone has one and if they could take several different clear angled pictures I would be very appreciative. If you feel comfortable removing the door and taking pictures that would be really nice, but if it's just left on the monitor, that is fine, and I understand, I wouldn't want to cause anyone to accidentally break their's.
I do know that I will probably have to heat it up and bend it a bit after it's printed, as it looks like it's probably not flat. I've got
If anyone's interested in viewing the STL, it's attached, but it wouldn't let me leave it as an STL file. Just change it from JPG to STL. There's an online viewer here: https://www.viewstl.com/
I had hoped someone had already made one of these, but I cannot find any online, I can find lots of doors for other monitors, but not any Tandy's.
Thanks