ASUS PVI-486SP3: Need specific resistor value \ VOGONS

ASUS PVI-486SP3: Need specific resistor value

Topic actions

Post a reply

First post, by BastlerMike

Posted on 2020-10-01, 23:10

BastlerMike Offline

Rank Member

Rank: Member
Posts: 234
Joined: 2010-10-11, 15:53

Somebody can tell me the value of R61 please?
I suspect this is the reason why the board is dead 🙁

Reply 1 of 5, by Thermalwrong

Posted on 2020-10-01, 23:25

Thermalwrong Offline

Rank Oldbie

Rank: Oldbie
Posts: 1432
Joined: 2018-03-18, 19:24
Location: England

This is a PVI-486SP3 v1.8, hope this helps 😀

Reply 2 of 5, by pentiumspeed

Posted on 2020-10-01, 23:52

pentiumspeed Offline

Rank l33t

Rank: l33t
Posts: 3112
Joined: 2017-05-17, 23:17
Location: Great Northern: Canada.

His torn off resistor, next to it is 220 ohm resistor, while yours are 100 Ohms resistors. Revisions do matter.

Cheers,

Great Northern aka Canada.

Reply 3 of 5, by BastlerMike

Posted on 2020-10-02, 00:48

BastlerMike Offline

Rank Member

Rank: Member
Posts: 234
Joined: 2010-10-11, 15:53

My board is revision 1.2
I soldered a 200 ohm resistor and the board is now working

Reply 4 of 5, by quicknick

Posted on 2020-10-02, 13:08

quicknick Offline

Rank Oldbie

Rank: Oldbie
Posts: 634
Joined: 2017-10-30, 23:53
Location: RO

Note that 100 and 220 mean 10 and 22 ohm respectively. (220 ohm would be marked 221).

Reply 5 of 5, by pentiumspeed

Posted on 2020-10-02, 20:42

pentiumspeed Offline

Rank l33t

Rank: l33t
Posts: 3112
Joined: 2017-05-17, 23:17
Location: Great Northern: Canada.

Oops. Forgot that. Yeah 22 ohms or 10 ohms are pretty low resistance. Enjoy!

Cheers,

Great Northern aka Canada.

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches