As the title already reveals, iam looking for a eeprom replacement for an Macronix MX 28F1000PL
As it seems, its not compatible with an Intel P28F001BX-T or a ST SST PH29EE010. Guessing the have a different pin lay-out.
Is there a 1:1 substitute for this IC?
~ At least it can do black and white~
The MX is a block type 16kx6 block + 4kx4 (112k +16K), Intel BX-T is a block type 112k + 4kx2 + 8k (112k + 16k). The pinouts appear the same from the datasheets so if BX-T is programmed from a external programmer it should work but I quickly checked the data so maybe not..
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
Do you know a substitute for the MX part? Or is this the only part with that configuration?
My Mini pro TL866CS cant read the chip in almost every chip selection.. I tried different ones, but those doesnt seems to work.
~ At least it can do black and white~
Hmm maybe something wrong with the eeprom, from TL866 device list: MX28F1000P, MX28F1000P @PLCC32, MX28F1000P @TSOP32 reading the software support list.
http://www.autoelectric.cn/MiniPro/MiniProSupportList.txt
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
I thought the same on maybe bad eeprom.
Do you know a substitute for the MX part? Or is this the only part with that configuration?
Should this be the same:
MX28F1000P
Only difference on mine is the L behind the P (maybe its an low voltage one)
~ At least it can do black and white~
