VOGONS


First post, by fabry892

User metadata
Rank Newbie
Rank
Newbie

Hi, I' bought a old compaq deskpro 2000 with pentium mmx 166.
If I push power button, nothing happend. No green led. No message on monitor or beep.
The power supply give the right voltage, tested with a multimeter.
I tryed to remove e reinstall ram, cpu and riser card. I added an external battery with 3 AA.
Nothing happens
Could be a bad processor or motherboard?
Thanks to whoever will give me a hand

Reply 1 of 1, by karakarga

User metadata
Rank Newbie
Rank
Newbie

https://www.youtube.com/watch?v=kW8QSI8rs-Y

Watch this video and, read

https://www.manualslib.com/manual/30266/Compa … skpro-2000.html

they may help, the problem might be anywhere....

First of all make a short contact between the green wire with a black one to start PSU from, if you have a 20 pin connector. If fan rotates inside the PSU, than you need to test other components, but not easy without a spare unit of each.

Good luck....